Sharp FO-6700 Service Manual download pdf (Page 39)

FO-6700U

FO-67DL

SW45 No. 5 ~ No. 8 CI signal off detect enable time

Used to set the continuous detection time during OFF period of CI sig-

nal. Normally set to 700ms, where the short ring (500ms: OFF period)

cannot be detected. Therefore, selection of 350ms is allowed.

SW46 No. 1 ~ No. 4 Reserved

Set to "0".

SW46 No. 5 ~ No. 8 Distinctive ringing

When the ringing setting is turned off, all of the CI signal are received.

When any of the standard, and ring patterns 1 through 3 is selected for

the ringing setting, only the selected CI signal is received.

CI signal patterns

The CI signal patterns consists of the standard pattern, and ring pat-

terns 1 through 7. The standard pattern is the conventional one.

SW39 No. 6 ~ No. 8 Reserved

Set to "0".

SW40 No. 1 Reserved

Set to "1".

SW40 No. 2 Reserved

Set to "0".

SW40 No. 3 Reserved

Set to "1".

SW40 No. 4 ~ No. 6 Reserved

Set to "0".

SW40 No. 7 Reserved

Set to "1".

SW40 No. 8 Reserved

Set to "0".

SW41 No. 1 ~ No. 4 V.34 mode transmission speed

Used to determine the initial modem speed when communication method

is V.34 transmission mode.

SW41 No. 5 ~ No. 8 V.34 mode receiving speed

Used to determine the initial modem speed when communication method

is V.34 reception mode.

SW42 No. 1 Reserved

Set to "1".

SW42 No. 2 V.34 mode function

Used to select the V.34 mode for communication when set to “1”, com-

munication method is V.34 mode..

SW42 No. 3 V.34 control channel communication speed

Used to select the control channel communication speed for V.34 mode.

SW42 No. 4, No. 5 EOL detection timer

Used to make a choice of whether to use the 25-second or 13-second

timer for detection of End of line This is effective to override communica-

tion failures with some facsimile models that have longer End of line

detection.

SW42 No. 6, No. 7 Processing of DIS reception after DIS trans-

mission

When receiving , operation in case of DIS reception after DIS transmis-

sion is selected. Retransmitting command: To retransmit DIS in disre-

gard of DIS reception.

Breaking circuit: To break circuit instantly. (Abnormal finish)

T. 30: To operate in accordance with T.30.

T. 30+α: To operate in accordance with T.30+α. (To operate differently

according to cases.)

SW42 No. 8 The change to DB from DP by

When setting to 1, the mode is changed by pressing the key from the

pulse dial mode to the tone dial mode.

SW43 No. 1 ~ No. 5 DTMF output level (High)

To set the level to output high group DTMF signals. –15 to 0 dBm (0.5

dBm unit)

SW43 No. 6 ~ No. 8 Reserved

Set to "0".

SW44 No. 1 ~ No. 5 DTMF output level (Low)

To set the level to output low group DTMF signals. –15 to 0 dBm (0.5

dBm unit)

SW44 No. 6 ~ No. 8 Reserved

Set to "0".

SW45 No. 1 ~ No. 4 Frequency of CI signal

Used to set the detection frequency of CI signal.

2 – 31

1.5S

0.8S

0.3S

0.4S

3.5S

0.5S

0.2S

0.8S

0.4S

0.3S

0.2S

0.4S 0.8S

0.2S 0.2S

0.5S

1S 0.5S

0.5S0.5S

0.5S

0.5S0.5S

STANDARD

RING

PATTERN 1

for USA

RING

PATTERN 2

for USA

RING

PATTERN 3

for USA

RING

PATTERN 1

for CANADA

RING

PATTERN 2

for CANADA

RING

PATTERN 3

for CANADA

RING

PATTERN 4

for USA

SW47 No. 1 ~ No. 7 Reserved

Set to "0".

SW47 No. 8 Reserved

Set to "1".

SW48 No. 1 Reserved

Set to "1".

SW48 No. 2 ~ No. 4 Reserved

Set to "0".

SW48 No. 5, No. 6 Reserved

Set to "1".

SW48 No. 7, No. 8 Reserved

Set to "0".

SW49 No. 1 Reserved

Set to "1".

SW49 No. 2 ~ No. 4 Reserved

Set to "0".

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 191 192

Comments to this Manuals

No comments

Sharp FO-6700 Service Manual Page 39

Comments to this Manuals

Related products and manuals for Fax machines Sharp FO-6700