Sharp FO-6700 Service Manual download pdf (Page 12)

FO-6700U

FO-67DL

4) Auto feeder mode

The auto feed function can be checked by inserting and discharging the

document. (The distance between pages can be displayed during op-

eration of the scanner.)

Check of auto feed function

After this mode is activated, set up the document, and press the

START key, and it will be automatically fed. (Before the START key is

pressed, the document sensor alone is activated.) Moreover, the

document size (A4/B4) and sensor information (A4/B4/ORG) are dis-

played when the document sensor is turned.

Display of distance between pages during operation of the scanner

• Soon after this mode is activated, press the FUNCTION key for 5

seconds or more, and the display mode of the distance between

pages will be activated. Then, set up the sending paper and select

the image quality, and then press the START key, and operation

will be started.

Be sure to press the FUNCTION key prior to the START key. If

the FUNCTION key is not pressed but the START key is pressed,

it will operate in the same matter as in the existing auto feeder

mode.

If the START key is pressed, the FUNCTION key will be invalid

hereafter. Therefore, the display mode of the distance between

pages and the existing mode can not be changed.

• While the sending paper is read, the image quality key can be

input. STD/FINE/S-FINE modes are usable. However, the same

operation of FINE will be selected if the intermediate tone is set.

• The image quality, the length of the sending page read, the page

distance to the next sending paper and the total of the sending

papers read are shown on the display.

• When the stop key is pressed or 100 sending papers are read,

the content shown on the display will be totally output as the list

after the remaining sending papers are discharged.

5) Aging mode

If any document is set up in the first state (when started), copying will be

executed. If it is not set up, "check pattern 1" of the print diagnosis is

output at the intervals of 1 time/60 minutes. (A total of 10 sheets are

output.)

6) Panel check mode

This is used to check whether each key is normally operated or not.

According to the key input, LCD is displayed. Moreover, during execution,

the document reading lamp is turned on.

Test results are printed. (The maximum 100 input keys can be printed .)

LED repeats lighting at regular intervals in sequence. (Lighting speed

is specified separately.)

In case of inputting all keys, key input OK is displayed when finishing

the STOP key.

When pressing the NUMERIC key during panel check, output of DTMF

corresponding with the key is started.

When pressing other keys, output is stopped.

7) Optical adjust mode

When this mode is executed, the reading LED will be lit. This will go out

if the STOP key is pressed.

8) Product check

The diagnosis is used in the production process.

After shift to the mode, the following operations are sequentially exe-

cuted. At this time, the sensor of read-error can be checked by feeding

the B4 document. Set up one short document of B4 size.

Memory clear (Same as Diagnosis 11)

Panel test (Same as Diagnosis 06)

Dial test (Same as Diagnosis 24)

Document auto feed

ROM & RAM test check (Same as the Diagnosis 03)

Flash memory test mode (Same as Diagnosis 12)

Registration of fixed data

Registration of rapid key No. and other data necessary for produc-

tion.

The registered data are shown in the following table. The chain dial

is not set for any destination.

Transmission check (Same as Diagnosis 10)

The soft switches necessary for production are set.

Test result print (one sheet)

Memory clear printing

Panel test result printing

ROM & RAM test result printing

Print area printing (one sheet)

01 20 06 25 11 1 21 01

02 21 07 26 12 2 22 02

03 22 08 27 13 3 23 03

04 23 09 28 14 4 24 04

05 24 10 29 15 5 25 05

Rapid FAX Rapid FAX Rapid FAX Rapid FAX

No. No. No. No. No. No. No. No.

04 : AUTO FEEDER MODE

B4 (A4 B4 ORG)

After setup of the document

Only the sensor which is

activated (fallen down) is displayed.)

The paper sheet size (A4/B4) is

displayed.

2 – 4

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 191 192

Comments to this Manuals

No comments

Sharp FO-6700 Service Manual Page 12

Comments to this Manuals

Related products and manuals for Fax machines Sharp FO-6700