Sharp FO-6700 Service Manual Page 8

  • Download
  • Add to my manuals
  • Print
  • Page
    / 192
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 7
FO-6700U
FO-67DL
8. Insert the two plastic bushes into the holes in
the circuit board (insert from the rear side of the
circuit board).
9. Fit the collars over the ends of the bushes to
secure them in the board.
10.Insert the two plastic spacers into the plate as
shown, and then attach the circuit board over
the plate so that the connector on the board
connects to the connector on the plate and the
spacers fit into the holes in the board. Secure
the board with two screws.
7. Attach the telephone jack plate and secure it
with the two screws.
11. Replace the rear cover and secure it with the four
screws. Close the print compartment cover.
Note: After installing the dual line option, be sure
to enter the sender’s name and fax number for Line
2 as explained on page 29 of the Operation
Manual.
1 – 5
Page view 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 191 192

Comments to this Manuals

No comments