Sharp FO-6700 Service Manual download pdf (Page 11)

FO-6700U

FO-67DL

2. Diagnostic items description

2-1. Fax diagnosis

1) Soft switch mode

In this mode, the soft switch are set and the soft switch list is printed.

• OFF to ON of telephone billing function which is using the image

memory is used (Note: In the existing set, the telephone billing

code function is specified from OFF to ON when the timer system

communication (including the batch communication) is set.)

Here, the memory is usable when the telephone billing code func-

tion is on. It can be set from ON to OFF while the memory is

used. However, if setting is practically changed even once, it can

not be returned from OFF to ON.

• Switching ON/OFF of PC interface function during the use of im-

age memory.

• OFF to ON of department control function during use of image

memory.

(Note: In the existing set, the department control function is set

from OFF to ON when the timer communication (including the

batch sending) or the memory hold is set.)

• ON to OFF of continuous serial polling function when the con-

tinuous serial polling is started.

(Note: In the existing set, "ON to OFF of the continuous serial

polling function when the continuous serial polling is registered"

has been applied, but the conditions are now moderated. How-

ever, registration is impossible to the program of the new continu-

ous serial polling when the continuous serial polling function is

OFF.)

• In addition, change of all soft switches during communication

Linked change of data (This is the same even in the optional setting.)

• When the department control function is off, the multi TTI func-

tion and telephone billing code function are turned off.

2) Print area

According to the size of the specified sheet, the effective printing area is

printed.

3) ROM & RAM check

Switch number selection

• Press START key for setting of the next soft switch. If the soft

switch number is the final, pressing START key will exit the soft

switch mode.

• Enter two digits of a soft switch number to set the switch number.

If a switch number of unexisting soft switch is entered, key error

buzzer sounds to reject the input.

Data number selection

The cursor position shows the data to be set.

Pressing # key moves the cursor to the right. If, however, the cursor is

on data number 8, pressing # key shifts the cursor to data number 1

of the next switch number. If the switch number is the final, pressing

# key will exit the soft switch mode.

Pressing key moves the cursor to the left. If, however, the cursor is

on data number 1, pressing key shifts the cursor to data number 1

of the former switch number. If the switch number is 1, pressing

key will not move the cursor and the error buzzer will sound.

Data setting method

Press the FUNCTION key, and the data at the position of the cursor

will be reversed to 0 when it is 1, or to 1 when it is 0. (If the soft switch

can be changed at the bit (Refer to .), the error buzzer will sound

with the process not received.)

Outputting method of soft switch list

In the soft switch mode, press the REPORT key, and the soft switch

list will be output.

If the recording paper runs out or is clogged, the key error buzzer will

sound with the process not received.

Storage of data

In the following case, the data of the soft switches set will be stored.

• It is shifted to set the next soft switch by pressing the START

switch.

• It is shifted to set the next soft switch with the [#] key.

• It is shifted to set the last soft switch with the [ ] key.

• It is shifted to set another soft switch by inputting two digits as the

switch number. (When 2 digits are completely input.)

• Output of the soft switch list is started.

Inhibition of data change

(This is also applicable for the optional setting.)

In the following case, it is inhibited to change the data with the key

error buzzer.

• Switching ON/OFF of ECM during the use of image memory.

• Switching OFF to ON of the print hold function when the print

hold pass code has not yet been registered.

• Clearing the print hold pass code when print hold function is ON.

• Switching ON/OFF of the print hold function during the use of

memory such as in the case of substitute receiving.

S O F T S W I T C H M O D E

S W 0 1 = 0 0 0 0 0 0 0 0

Soft switch mode screen

Switch

No.

7 :DATA No.

Data

S O F T S W I T C H M O D E

S W 0 1 = 0 0 0 0 0 0 0 0

E N T E R L A S T D I G I T

S W 1

S O F T S W I T C H M O D E

S W 1 6 = 0 0 0 1 0 1 1 0

1 6

No. Device checked

Number of buzzer sound

Remarks

1 ROM <Short sound> 1 time <Short sound>:

Main

Integrated ROM <Short sounds> 2 times

0.5 sec.ON / 0.5 sec.OFF

3 SRAM <Short sounds> 3 times <Long sounds>:

4 D-RAM <Short sounds> 4 times 1.0 sec.ON / 0.5 sec.OFF

5 ROM <Long sound> 1 time

Sub1

Integrated ROM <Long sounds> 2 times

7 D-RAM <Long sounds> 3 times

8 Dual port RAM <Long sounds> 4 times

9 ROM <Long sounds> 5 times

Sub2

Integrated ROM <Long sounds> 6 times If the sub-2 PWB is not

11 D-RAM <Long sounds> 7 times installed, error buzzers

12 Dual port RAM <Long sounds> 8 times will not go off.

ROM CPU SRAM DRM DPR

• • • • • • • •

ROM CPU SRAM DRM DPR

PP PP P EP P

ROM CPU SRAM DRM DPR

• • • • • • • • • • • •

ROM CPU SRAM DRM DPR

PPP PPP P EPE PP

2 – 3

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 191 192

Comments to this Manuals

No comments

Sharp FO-6700 Service Manual Page 11

Comments to this Manuals

Related products and manuals for Fax machines Sharp FO-6700