Sharp FO-6700 Service Manual download pdf (Page 16)

FO-6700U

FO-67DL

The cursor blinks at the top data.

Three counters can be selected with the "#" and " " keys.

In the state , input a desired setting number of 6 digits with the ten-

key.

After input of 6 digits, shift to another counter with the "#" and " "

keys as necessary. When all necessary counters are completely in-

put, press the START key.

"STORED" will be displayed with the set values stored into the

memory. For checking, retry this mode.

Note: The counter shows the operational state of the printer (how many

sheets have been printed since start of use? and others). The

ordinary memory does not reset the counter. Accordingly, it is

necessary to reset the counter or do the clear process in addi-

tion to the ordinary memory clear if the content in the memory

on the control PWB is broken because of PWB repair, etc. (In

the production stage, it is necessary to execute this in the last

process.)

Rapid key 10: Top adjust mode

As the method to adjust the top margin for printing, adjust top margin

adjusting VR on the PWB. If this mode is used at this time, adjustment is

possible without the printing test every time when VR is turned.

For the practical use, determine the adjusting value on the basis of the

old data, and adjust to the determined value in this mode. Then, check it

with the printing test.

Rapid key 11: Life clear mode

The mode is used to respectively clear the life counter of the printer and

the counter of the auto feeder. For setting, proceed with the following

procedure.

When the life counter clearing mode is selected, the following will be

is displayed.

Seven counters can be selected with the "#" and " " keys.

In the state , input the CLEAR key, and the counter will be respec-

tively cleared.

After one clear, move the cursor to another counter with the "#" and

" " keys as necessary, and then press the CLEAR key. When the

necessary counters are completely cleared, press the STOP key.

MACHINE

DRUM

LIFE

IFE1

LEAR

FEEDER L I FE LEAR

TONER L I FE LEAR

LEAR

LIFE2

LEAR

LIFE3

LEAR

key

# key

Note:

This counter indicates the printer use conditions such as numbers of

printed pages from the beginning of use. In the normal memory clear

condition, the counter will not be reset.

In conditions including damaged memory contents caused by repairing

the panel, this counter should be reset or cleared in addition to the ordi-

nary memory clear.

Operation Manual for multipurpose Counter Life 1-3

The FAST function of LIFE 1-3 automatically notifies the dealer that the

printer life has reached the optional judgement value. This function can

be applied to notify when the life of consumables such as the printing

unit and fixer is expired.

How to use it

(1) Set the optional judgement value (counter value for alarming) of the

multipurpose life counter 1-3 in the printer diagnotor 09: LIFE ENTRY

MODE.

The setting procedure is as follows:

1. Select each counter with " " or "#" key. (Refer to the chart below.)

2. Enter 6 digits using the ten key on the screen of the judgement

value to be set.

3. If another value is to be set after completion of the first entry,

move onto another value with "#" or " " key and enter digits in

the same procedure. Press the "START" key when all values are

entered. (Writing is completed when "STORED" appears on the

display.)

(2) The counter whose value is set in (1) will start counting every time a

letter is printed.

(3) When each counter reaches its judgement value, the FAST auto

matic notification function is activated and alarms it to the dealer.

• If the FAST function is off, the counter only counts and does not notify

the dealer automatically.

Rapid key 08: Life all clear

The mode is used to clear the life counter of the printer of the counter

of the auto feeder.

Note: The counter shows the operational state of the printer (e.g. how

many sheets have been printed since start of use?). The ordi-

nary memory does not reset the counter. Accordingly, it is nec-

essary to reset this counter in addition to the ordinary memory

clear if the content in the memory on the control PWB is broken

because of PWB repair, etc. (In the production stage, it is nec-

essary to execute this in the last process.)

Rapid key 09: Life entry mode

(For Serviceman temporary counter)

The mode is used to set a desired value for the judgment value (alarm

judgment counter value) of the general purpose life counters 1 thru 3 of

the printer. If the life of a consumable part (developer, imprinter, etc) is

set, the model which has the error display and RMS function will inform

RMS when the counter reaches the set value. For setting, proceed with

the following procedure.

When the life counter setting mode is selected, the following will be

displayed.

LI FE1= 00000

LI FE2= 00000

LI FE3= 00000

# key

key

2 – 8

LI FE1= 00000

LI FE2= 00000

LI FE3= 00000

# key

key

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 191 192

Comments to this Manuals

No comments

Sharp FO-6700 Service Manual Page 16

Comments to this Manuals

Related products and manuals for Fax machines Sharp FO-6700