Sharp AN-CM250 Specifications download pdf (Page 59)

Selecting Adjustment Settings

Adjustment settings stored in the projector

can be easily accessed.

Select “Select Setting” in the “Fine

Sync” menu on the menu screen.

➝For operating the menu screen, see

pages 42 to 45.

Note

• If a memory position has not been set, a

resolution and frequency setting will not

be displayed.

• When selecting a stored adjustment set-

ting with “Select Setting”, you can set the

projector in the stored adjustments.

Special Mode Settings

Ordinarily, the type of input signal is detected

and the correct resolution mode is automati-

cally selected. However, for some signals, the

optimal resolution mode in “Special Modes”

on the “Fine Sync” menu screen may need

to be selected to match the computer display

mode.

Set the resolution by selecting “Special

Modes” in the “Fine Sync” menu on the

menu screen.

➝For operating the menu screen, see

pages 42 to 45.

Note

• Avoid displaying computer patterns which

repeat every other line (horizontal stripes).

(Flickering may occur, making the image

hard to see.)

• When a DVD player or Digital Video is con-

nected, select 480P as the input signal.

• See “Checking the Input Signal” on the next

page for information on the currently se-

lected input signal.

-58

Adjusting Computer Images

XV_Z12000_E_US_p42_60.p65 03.9.24, 2:03 PM58

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 96 97

Comments to this Manuals

No comments