Sharp AN-CM250 Specifications download pdf (Page 31)

-30

90°

Example of Standard Setup

Setting up the Screen

Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image.

Note

• The projector lens should be centered in the middle of the screen. If the horizontal line passing through the

lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult.

• For optimal image, position the screen so that it is not in direct sunlight or room light. Light falling directly on

the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when

setting up the screen in a sunny or bright room.

• A polarizing screen cannot be used with this projector.

Standard Setup (Front Projection)

■ Place the projector at the required distance from the screen according to the desired picture size. (See

page 31.)

Screen size : 100 inches (254 cm)

Aspect ratio : 16:9

Side View

Top View

Audience

Setup

• The distance from the screen to the projector

may vary depending on the size of the screen.

P.31

• The default setting can be used, when placing the

projector in front of the screen. If the projected im-

age is reversed or inverted, readjust the setting to

“Front” for “PRJ Mode” in the “Options” menu.

P.73

• Place the projector so that an imaginary horizontal

line that passes through the center of the lens is

perpendicular to the screen.

XV_Z12000_E_US_p27_32.p65 03.9.24, 1:58 PM30

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 96 97

No comments

Sharp AN-CM250 Specifications Page 31