Sharp AN-CM250 Specifications download pdf (Page 28)

Connections and Setup

-27

Setup

Foot releases

Adjustment feet

Using the Adjustment

Feet

The height of the projector can be adjusted

using the adjustment feet when the projector

is placed on an uneven surface or when the

screen is slanted.

The position of the projected image can be

made higher by adjusting the projector when

it is in a location lower than the screen.

1 Press the foot releases and lift

the projector to the desired

angle.

2 Remove your hands from the

foot releases. Once the adjust-

ment feet have locked in posi-

tion, release the projector.

• If the screen is at an angle, the ad-

justment feet can be used to adjust the

angle of the image.

Note

• The projector is adjustable up to approxi-

mately 5 degrees from the standard posi-

tion.

• When the height of the projector is ad-

justed, the image may become distorted

(keystoned), depending on the relative

positions of the projector and the screen.

See page 38 for details on the keystone

correction.

Info

• Do not hold the lens when lifting or lower-

ing the projector.

• When lowering the projector, be careful

not to get your finger caught in the area

between the adjustment foot and the

projector.

XV_Z12000_E_US_p27_32.p65 03.9.24, 1:58 PM27

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 96 97

Comments to this Manuals

No comments