Sharp TM150 Operations Instructions download pdf (Page 24)

3.3 Heating the boiler

3.3.1 Switching on the system

❒ Turn the main switch on the switch cabinet to the "ON" position

➥

After the system check by the controller, the system is ready for operation

➥

"Switched off Off" appears on the display

3.3.2 Switching on the boiler

Heating up with automatic ignition (LM 500 Kom only)

❒ Press the Start button

➥

Fuel is fed into the combustion chamber and heated by the ignition blower fan.

➥

The heating system is controlled via the controller according to the selected

mode.

Heating up without automatic ignition

Prepare the material:

❒ paper and cardboard

❒ coarse wood chips

❒ dry firewood

With the boiler switched off:

❒ Set the "ID fan" selector switch to "OFF"

❒ The ID fan is deactivated and does not start up automatically when the combus‐

tion chamber door is opened

❒ Place some scrunched-up paper and cardboard inside

❒ Place some coarse wood chips on top and finally some firewood

❒ Light the paper

❒ Set the "ID fan" selector switch to "MANUAL"

➥

The ID fan starts up

➥

This helps to ignite the material more quickly and prevents smoke from devel‐

oping inside the boiler room

➥

Leave the combustion chamber door open!

Operating the system

Heating the boiler

24 Froling GesmbH | A-4710 Grieskirchen, Industriestraße 12 | www.froeling.com

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 45 46

No comments

Sharp TM150 Operations Instructions Page 24