Once the firewood is alight:
❒ Use the cleaning tool to push fuel to the back of the combustion chamber
Start the boiler:
❒ Close the combustion chamber door
❒ Set the "ID fan" selector switch to "AUTO"
❒ Acknowledge the combustion chamber door error message
❒ Press the Start button
➥
The boiler is switched on and begins to heat up
3.3.3 Kessel-Solltemperatur einstellen
Kessel-Solltemperatur erhöhen:
❒ Temperaturwähler nach rechts drehen
➥
Kessel-Solltemperatur wird erhöht
Rechter Anschlag entspricht der eingestellten Kessel-Solltemperatur (max.
90°C)
Kessel-Solltemperatur verringern:
❒ Temperaturwähler nach links drehen
➥
Kessel-Solltemperatur wird verringert
Linker Anschlag entspricht 70°C
3.3.4 Controlling the boiler
NOTICE! See the operating instructions for the Lambdatronic H 3000
3.3.5 Switching off the boiler
❒ Press the Stop button
➥
The boiler follows the shutdown program and switches to "Switched off Off"
status
➥
The Lambdatronic controls the connected heating components.
N
OTICE! Always use the Stop button to shut down the boiler according to procedure.
The pumps must continue to run for a minimum of 6 hours!
Operating the system
3
Heating the boiler
Operating Instructions TM 150/199/220 | B0310611_en 25
Comments to this Manuals