Sharp UX-B30 Specifications download pdf (Page 50)

Sending a Fax by Automatic Dialling

If you are sending a fax, load the

document(s).

• If desired, press to set the

resolution and/or contrast.

Press once. <REDIAL> appears in the display, followed by the last

number dialled. Make sure the number that appears is the number you

wish to dial.

If you are sending a fax, press . Dialling begins.

If you are making a phone call, lift the handset. Dialling begins.

Note: If the transmission is unsuccessful and DOCUMENT JAMMED appears

in the display, remove the document as explained on page 100. (This may

occur if the other fax machine doesn’t respond properly when you attempt to

send the document.)

RESO.

START/

MEMORY

Redial

You can automatically redial the last number dialled on the fax machine. This

procedure can be used to send a fax or make a phone call.

Automatic redialling

If you use automatic dialling (including Direct Keypad Dialling) to send a fax

and the line is busy, the fax machine will automatically redial the number. The

fax machine will make two redial attempts at intervals of five minutes. During

this time, RECALLING will appear in the display, followed by a two-digit

number assigned to the fax job. You will not be able to dial any other locations

while the message appears.

♦ You can press to clear the message and stop automatic redialling.

READY TO SEND

all.book Page 48 Monday, May 10, 2004 2:03 PM

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 106 107

No comments

Sharp UX-B30 Specifications Page 50