Sharp R-530BW User Manual download pdf (Page 33)

IBX-530B-270 Embedded System

Page 21

3.5.3 CF Card Setup

Jumper Label: JCF1

Jumper Type:

2-pin header

Jumper Settings:

See Table 3-3

Jumper Location:

See Figure 3-3

The CF Card Setup jumper sets the CF Type I card or CF Type II cards as either the slave

device or the master device. CF Card Setup jumper settings are shown in

Table 3-3.

Setting Description

Open Slave Default

Closed Master

Table 3-3: CF Card Setup Jumper Settings

The CF Card Setup jumper location is shown in Figure 3-3.

Figure 3-3: CF Card Setup Jumper Location

3.5.4 Clear CMOS Jumper

Jumper Label: J_CMOS1

Jumper Type:

2-pin header

Jumper Settings:

See

Table 3-4

Jumper Location:

See

Figure 3-4

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 132 133

No comments

Sharp R-530BW User Manual Page 33