Sharp AR-168N Specifications download pdf (Page 171)

AR-168N/168L FIRMWARE DOWNLOAD PROCEDURES 15 - 5

7) PC side: Double-click "Special (MCU/IMC2/Facsimile)" to develop

its sub trees, and select "Upload EEPROM Data Area" in the sub

trees.

8) PC side: Enter a desired file name, and select "Save."

9) PC side: When upload is completed, the complete message is dis-

played.

With the above procedure, the EEPROM data acquisition is completed.

Data acquired by the EEPROM data acquisition procedure are saved

in a file with extension of .eep.

5. Installing procedures

Driver installation is made on plug-and-play.

1) Main unit side: Execute Test command No. 49-01 (Flash ROM pro-

gram write mode).

Check that "DOWNLOAD MODE" is displayed on the LCD of the

operation panel. (Press and hold [CA] key and [DOWN] key (left

key) together, and turn on the power simultaneously.)

2) Connect the machine and the PC with a USB cable.

3) The following display is shown.

Select [Install from a list or specific location] and press <Next> but-

ton.

4) Select [Include this location in the search;]. If the search location is

not the folder which includes the maintenance tool driver

(Mainte.inf), select <Browse>. If the search location is the folder

which includes the maintenance tool driver, press <Next> button to

go to procedure 7).

15_FIRMWARE.fm 5 ページ２００５年１１月１８日金曜日午後７時２５分

1 2 ... 166 167 168 169 170 171 172 173 174 175 176 177

No comments

Sharp AR-168N Specifications Page 171