Sharp AR-168N Specifications download pdf (Page 167)

AR-168N/168L FIRMWARE DOWNLOAD PROCEDURES 15 - 1

[15] FIRMWARE DOWNLOAD

PROCEDURES

[Preparation]

Write the download data (extension .dwl) into the main unit.

A USB port is required for the PC.

Create "MaintenanceTool " folder in the PC, and copy the following

files to the folder.

Necessary for program download

• Maintenance.exe (← Tool program)

• ProcModelB.mdl

• ProcModelC.mdl

• ProcModelE.fmt

• ProcModelE.ini

• ProcModelE.mdl

Driver

• Drivers/2kXP/Mainte.inf (For Windows XP/2000)

• Drivers/Win9xME/Mainte.inf (For Windows Me/98SE)

• Drivers/Win9xME/UsbScan.sys (For Windows Me/98SE)

Download file

• Download file (extension .dwl)

Note: Copy the download data file (extension .dwl) to the folder in

which the maintenance program is included.

When making a folder for the maintenance tool in the PC, do not

put a long folder name in the absolute path.

[Example]

Erroneous case: c:\Mainte nance Tool Download

Proper case: c:\MaintenanceTool

1. Initial setting

(Serial number setting procedures)

The serial number is set to the PC which is used for downloading. Set-

ting is required once only, and there is no need to set again when

rebooting the program.

Note: This setting is required only when downloading the default data

of E2PROM, and is not required when downloading firmware

only.

1) PC side: Boot "Maintenance.exe" and select "AR-168/M150/M155

series" in the "Select Model" menu.

(Only to set the serial number, the PC should not be connected to

the machine.)

2) Select "Option" → "Serial Number Setting" on the menu bar.

3) Set the serial number according to the following.

After completion setting, press [OK] key.

4) The serial number has been assigned.

2. Download procedures

1) Main unit side: Execute Test command No. 49-01 (Flash ROM pro-

gram write mode).

Check that "DOWNLOAD MODE" is displayed on the LCD of the

operation panel. (Press and hold [CA] key and [DOWN] key (left

key) together, and turn on the power simultaneously.)

2) Connect machine and the PC with a USB cable. (Connect it to the

USB port on the main unit without fail.

3) PC side: Boost "Maintenance.exe" and select "AR-168/M150/M155

series" in the Select Model menu.

Product Code (P): Enter number (0 – 99)

Enter the product code of “3.”

ID Code(I): Enter number (0 – 99)

Assign an individual code to each PC uses

“Maintenance.exe.”

15_FIRMWARE.fm 1 ページ２００５年１１月１８日金曜日午後７時２５分

1 2 ... 162 163 164 165 166 167 168 169 170 171 172 ... 176 177

Comments to this Manuals

No comments

Sharp AR-168N Specifications Page 167

Comments to this Manuals

Related products and manuals for Multifunctionals Sharp AR-168N