<P=003>
•
••
•
Make sure that the fax is set to the correct
dialling mode for your telephone line. See
Option Setting 7 in Chapter 8.
The power is on, but no
transmission takes place.
•
••
•
Make sure that the receiving machine has fax
paper.
•
••
•
Make sure that the telephone line cord is
plugged into the TEL. LINE socket, and not the
TEL. SET socket.
•
••
•
If the receiving machine is in manual mode with
no attendant, reception will not be possible.
•
••
•
If the receiving machine is not a Sharp model,
make sure it is G3 compatible.
•
••
•
Check the display for error messages.
•
••
•
Pick up the handset and check for a dial tone.
Call the receiving machine by normal (manual)
dialling, and confirm its response.
Nothing is printed at the
receiving end.
•
••
•
Make sure that the document for transmission is
placed face down in the feeder.
A distorted image is
received at the other end.
•
••
•
Noise on the telephone line may cause
distortion. Try sending the document again.
•
••
•
Make a copy of the document on your fax. If the
copy is also distorted, your fax may have a
problem. If the problem persists, call for service.
Reception and copying problems
Problem Check and remedy
The power is on, but no
reception takes place.
•
••
•
Make sure the wall socket is connected to the
TEL. LINE socket, and not the TEL. SET socket.
The printing paper comes
out blank when you try to
receive a document.
•
••
•
Make sure that the document is loaded properly
in the feeder of the transmitting machine. Make a
copy to confirm the printing ability of your
machine.
Problems and Solutions
112
Comments to this Manuals