Sharp AR-FX7 Instruction Manual download pdf (Page 72)

PROGRAMMING

Use the numeric keys to enter the fax

number.

•

To insert a pause between digits of the number, touch

the [PAUSE] key. The pause appears as a hyphen "-".

See page 97 to set the duration of the pause.

• If you make a mistake, press the [CLEAR] key ( )

to clear one digit at a time, and then enter the correct

digit(s).

• If you are not going to enter a sub-address and

password after the fax number, go to step 12.

If you need to enter a sub-address, touch

the [SUB ADDRESS] key and then enter

the sub-address with the numeric keys.

When you touch the [SUB

ADDRESS] key, a slash is

entered after the fax

number. Enter the

sub-address after the

slash (max. 20 digits).

If you do not wish to enter

a passcode, go to step 12.

If you wish to enter a passcode, touch the

[SUB ADDRESS] key once again and enter

the passcode with the numeric keys.

When you touch the

[SUB ADDRESS] key, a

slash is entered after the

sub-address. Enter the

passcode after the slash

(max. 20 digits).

Touch the [OK] key.

You will return to the rapid key programming

screen.

"REGISTRATION IS COMPLETED." will appear

highlighted to the right of "No.".

Check the key name.

The characters appearing next to the [KEY

NAME] key will be displayed in the key. Only the

first 18 characters of the name entered in step 1

will be displayed.

If you need to change the name that will be

displayed in the key, touch the [KEY NAME] key

(If you do not wish to

change the name, this

step is not necessary).

See page 80 for the

procedure for entering

characters.

Check the transmission settings

The initial transmission settings are

"TRANSMISSION SPEED: 33.6 kbps" and

"INTERNATIONAL CORRESPONDENCE

MODE: NONE". To change either of the settings,

touch the [MODE] key.

If you do not wish to

change the settings, this

step is not necessary.

After touching the

[MODE] key, you can

change either of the two

settings. When finished,

touch the [OK] key.

Transmission speed

Speed selections are 33.6 kbps, 14.4 kbps, 9.6 kbps,

and 4.8 bps. The higher the number, the faster the

transmission speed.

• For information on sub-addresses and

passwords, see "TRANSMISSION

BETWEEN MACHINES SUPPORTING

F-CODES" on page 51.

• The maximum number of digits that can

be entered is as follows:

When the destination does not include a

sub-address and passcode, 50 digits

including the fax number and any pauses

(hyphens).

When the destination includes a

sub-address and passcode, 92 digits

including the fax number, any pauses

(hyphens), and slashes "/" (to separate

the sub-address and passcode).

DIRECT ADDRESS / RAPID

EXIT

FAX No.

001

ENTER THE FAX No. VIA THE 10-KEY PAD, THEN PRESS [OK].

0666211221

OKCANCEL

PAUSE

SUB ADDRESS

Note

PRESS [OK].

PAUSE

SUB ADDRESS

o. VIA THE 10-KEY PAD, THEN PRESS [O

0666211221/3456/

The "FAX No." line only shows 32 digits,

regardless of the number of digits stored in

the number.

Set the transmission speed only when you

know what speed is most suitable, such as

when you are sending a fax to a foreign

country and telephone line conditions are

bad. If you do not know the line condition, do

not change this setting.

Note

NAME SHARP CORPORATION

INDEX USER 3 FAX No

KEY NAME SHARP CORPORATION

REGISTRATION IS COMPLETED.

INITIAL

0666211221/3456/987654FAX No.

33.6 kbps/NONE

MODE

Note

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 115 116

Comments to this Manuals

No comments

Sharp AR-FX7 Instruction Manual Page 72

Comments to this Manuals

Related products and manuals for Copiers Sharp AR-FX7