Sharp XE-A213 User Manual download pdf (Page 93)

Part3

FOR THE MANAGER

Part2Part1

Installing the paper roll

Caution: The paper cutter is mounted on the printer cover. Be careful not to cut yourself.

Installing the receipt paper roll:

1. Turn the mode switch to a position other than

“ ” with the power cord connected.

2. Remove the printer cover.

3. Lift up the print roller release lever to unlock

and open the print roller arm.

4. Set the paper correctly in the paper roll cradle.

5. Feed the end of the paper along with the paper

positioning guides.

6. While holding down the paper, slowly close the print roller arm, and

push down the arm until you hear a click locking the arm. Make

sure securely you push down the center of the wing part of the arm

as per the diagram. The paper will be fed automatically.

If the print roller arm is not securely locked, printing is not

done right. If this problem occurs, open the arm, and

close the arm as instructed above.

7. Cut off the excess paper using the edge of the inner cover, and

replace the printer cover. Press the

key to make sure the

paper end comes out of the printer cover and clean paper appears.

If the paper end does not come out, open the printer

cover, and pass the paper end between the paper cutter

and the paper guide of the printer cover, and replace the

cover.

Installing the journal paper roll:

1. Turn the mode switch to a position other than “ ” with the power

cord connected.

2. Remove the printer cover.

3. Lift up the print roller release lever to unlock and open the print

roller arm.

4. Set the paper correctly in the paper roll cradle.

5. Feed the end of the paper along with the paper positioning guides.

6. While holding down the paper, slowly close the print roller arm, and

push down the arm until you hear a click locking the arm. Make

sure securely you push down the center of the wing part of the arm

as per the diagram. The paper will be fed automatically.

If the print roller arm is not securely locked, printing is not

done right. If this problem occurs, open the arm, and

close the arm as instructed above.

Paper positioning guides

A213_3 FOR THE MANAGER(SEEG) 06.4.28 8:33 PM Page 91

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 483 484

Comments to this Manuals

No comments

Sharp XE-A213 User Manual Page 93

Comments to this Manuals

Related products and manuals for Video Sharp XE-A213