Sharp AR-5015 N Specifications download pdf (Page 44)

COPY FUNCTIONS

Using the document glass

Place the first original. (p.27)

Select the original size. (p.27)

Press the [SORT/GROUP] key

( / ) to select the desired

mode.

The modes are selected

in the order "SORT"

( ), "GROUP"

( ), "Off".

Set the number of copies and other

settings, and then press the [START]

key ( ).

The ORIGINAL DATA indicator ( ) blinks,

and the original is scanned into memory.

When the start indicator lights,

replace the original with the next

original, and then press the [START]

key ( ).

Repeat step 5 until all originals have been

scanned into memory.

When all originals have been

scanned, and then press the

[READ-END] key ( ).

The copies are delivered to the paper output tray.

Using the SPF/RSPF

Place the originals. (p.28)

Sort mode is normally the default output mode,

and thus the SPF/RSPF and SORT indicators

light up.

Press the [SORT/GROUP] key

( / ) to select the desired

mode.

The modes are selected

in the order

"SORT"( ),

"GROUP" ( ), "Off".

Set the number of copies and other

settings, and then press the [START]

key ( ).

The copies are delivered to the paper output tray.

If the memory becomes full

•

If the memory becomes full while scanning the

originals, the ORIGINAL DATA indicator ( )

will blink, "FUL" will appear in the display, and the

machine will stop copying.

•

To copy the originals that have been scanned up

to that point, press the [START] key ( ).

•

To clear the data that has been scanned into

memory, press the [CLEAR ALL] key ( ) or the

[CLEAR] key ( ).

If the paper output tray becomes full

When the maximum number of pages (about 250

pages) that can be held in the paper output tray are

output, copying will temporarily stop. When this

happens, promptly remove the copies and press the

[START] key ( ) to resume copying.

To clear the data in memory, press the

[CLEAR] key

().

• To cancel the Sort/Group copy job, press

the [CLEAR] key ().

• To cancel Sort or Group mode, press the

[SORT/GROUP] key ( / )

repeatedly until the SORT/GROUP

indicators ( / ) are both off.

DATA

Note

• If "Sort auto select" has been set to "1:

OFF" in the system settings, follow the

steps below to select sort mode.

• "Sort auto select" can also be used to

change the default output mode (p.73).

• To cancel the Sort/Group copy job, press

the [CLEAR] key ().

• To cancel Sort or Group mode, press the

[SORT/GROUP] key ( / )

repeatedly until the SORT/GROUP

indicators ( / ) are both off.

Note

DATA

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 107 108

Comments to this Manuals

No comments

Sharp AR-5015 N Specifications Page 44

Comments to this Manuals

Related products and manuals for Copiers Sharp AR-5015 N