Sharp AR-5015 N Specifications download pdf (Page 24)

BEFORE USING THE MACHINE

LOADING PAPER

Make sure that the machine is not copying or printing, and then follow these steps to load paper.

Loading the paper tray

Gently lift and pull out the paper tray

until it stops.

Push the pressure plate down until it

locks in place.

Push the centre of the

pressure plate down until

it locks into place.

Load paper into the tray.

• Open the package of

the paper and load it

without fanning the

paper.

• Make sure the stack of

paper is straight before

loading it.

Gently push the paper tray into the

machine.

For how to load paper, refer to the steps below.

• Do not load paper higher than the line on

the tray (up to 250 sheets).

• Do not add paper to the loaded paper. It

may cause multiple feed of paper.

• A5 (5-1/2" x 8-1/2") can be used in the

upper paper tray but cannot be used in

other trays (including trays in optional paper

feeding unit).

• If you loaded a different size of paper than

was loaded previously in the tray, go to

"CHANGING A TRAY'S PAPER SIZE

SETTING" (p.24).

• When misfeed occurs, rotate the paper 180

degrees and reload it.

• Straighten curled paper before using it.

Note

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 107 108

No comments

Sharp AR-5015 N Specifications Page 24