Sharp UX-B800 User Manual download pdf (Page 63)

Problems and Solutions

10. Trouble-

shooting

Line error

Problem Solution

LINE ERROR appears in

the display.

A line error occurs when your machine cannot

communicate correctly with another fax machine. The

error is usually due to a problem on the phone line.

Try faxing again. If unsuccessful, check the following:

• Check the connection. The cord from the TEL. LINE

socket to the wall socket should be no longer than two

meters.

• Make sure there are no modem devices sharing the

same telephone line.

• Check with the other party to make sure their fax

machine is functioning properly.

• Have your telephone line checked for line noise.

• Try connecting the machine to a different phone line.

• If the error persists, the machine may need service.

10. Troubleshooting

Problems and Solutions

♦

For network connection problems (Scan to E-mail), see page 17.

Dialling and transmission problems

Problem Solution

No dial tone when you

pick up the handset or

press .

• Make sure the handset cord is connected to the

correct socket. See

Connect the handset

on page 8.

• Make sure that the telephone line is properly

connected to both the TEL. LINE socket and the wall

socket (see page 12).

• Make sure that the telephone line is good.

SPEAKER

all.book Page 61 Thursday, August 10, 2006 2:22 PM

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 73 74

No comments

Sharp UX-B800 User Manual Page 63