Sharp UX-B800 User Manual download pdf (Page 35)

Sending a Fax: Auto Dialling

3. Sending

Faxes

• If you are on a Flash-type PBX and

are dialling out, press , press

to insert a pause, and then

enter the number of the receiving

machine.

• If you are on a PBX and must dial a

number to dial out, enter the number,

press to insert a pause, and

then enter the number of the

receiving machine.

Check the display. If the number

shown is correct, press .

• If the number is not correct, press

to clear the incorrect digits, and

then re-enter the correct digit(s).

Redial

You can automatically redial the last

number dialled on the machine.

Load the document(s).

• If desired, press to set the

resolution and/or contrast.

Press once. Make sure the

display shows the number you wish

to dial.

FUNCTION

STOP

RESOLUTION/

RECEPTION MODE

If you are sending a fax, press

. Dialling begins.

If you are making a phone call, lift

the handset. Dialling begins.

Note: If the transmission is

unsuccessful and [DOCUMENT

JAMMED] appears in the display,

remove the document as explained on

page 67.

Automatic redialling

If you use auto dialling (including Direct

Keypad Dialling) to send a fax and the

line is busy, the machine will

automatically make three redial

attempts at intervals of five minutes.

During this time, [RECALLING] will

appear in the display, followed by the

attempt number. You will not be able to

dial any other locations while the

message appears.

♦ To clear the message and stop

automatic redialling, press .

Under certain conditions, automatic

redialling may stop before three

redialling attempts are made.

STOP

all.book Page 33 Thursday, August 10, 2006 2:22 PM

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 73 74

Comments to this Manuals

No comments

Sharp UX-B800 User Manual Page 35

Comments to this Manuals

Related products and manuals for Telephones Sharp UX-B800