Sharp R-890SLM Service Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 47
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
R-890SLM
5 - 4
3. COOLING FAN OPERATION
OPERATION MODE DEVICE POWER CONTROL
PREHEAT
Cooling 60%
CONV. (OVEN)
Cooling fan 60% 60 min. then 100%
Others Cooling fan 100%
After cooking
Cooling fan
A cooling fan continues the rotation when Oven temperature is more than 120°C.
Then, it stops when it is less than 105°C
Indication
NOW COOLING is indicated during the cooling fan movement after operation is
finished. (It isn’t indicated during a fan movement to stop on the way.)
4. CONVECTION POWER SETTING
4.1. PREHEATING
TEMP 250°C, 230°C, 220°C, 200°C, 180°C, 160°C, 130°C, 100°C, 70°C, 40°C
HEATING ELEMENT
TOP
100%
BOTTOM
100%
COOLING FAN
60%
CONV. FAN
0%
4.2. CONVECTION
TEMP
250°C 230°C 220°C 200°C 180°C 160°C 130°C 100°C 70°C 40°C
WITHOUT PREHEATING
HEATING
ELEMENT
TOP
50% 40% 40% 30% 20% 10% 10% 10% 10% 10%
BOTTOM
100% 90% 80% 70% 70% 60% 50% 40% 30% 20%
WITH PREHEATING
HEATING
ELEMENT
TOP
50% 40% 40% 30% 20% 10% 10% 10% 10% 10%
BOTTOM
90% 70% 60% 50% 50% 50% 50% 40% 30% 20%
COOLING FAN
60% 60min, then 100%
CONV. FAN
100% 0%
4.3. COMBI-1 (Micro + Conv)
TEMP
250°C 230°C 220°C 200°C 180°C 160°C 130°C 100°C 70°C 40°C
WITHOUT PREHEATING
HEATING
ELEMENT
TOP
50% 40% 40% 30% 20% 10% 10% 10% 10% 10%
BOTTOM
100% 90% 80% 70% 70% 60% 50% 40% 30% 20%
WITH PREHEATING
HEATING
ELEMENT
TOP
50% 40% 40% 30% 20% 10% 10% 10% 10% 10%
BOTTOM
90% 70% 60% 50% 50% 50% 50% 40% 30% 20%
MICRO 10%, 30%, 50%
COOLING FAN
100%
CONV. FAN
100% 0%
NOTE:
The oven temp was checked by the thermometer when each stage is started.
If the oven temp is same or higher than 105°C, the oven was judged as “with preheating”.
When the oven temp is lower than 105°C or the cooling fan stops, the oven was judged as “without preheating”.
Micro and Top heating element can’t be on at the same time.
Service_R-890SLM.indd 10 4/25/09 10:54:58 AM
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 46 47

Comments to this Manuals

No comments