Sharp SF-2530 Specifications download pdf (Page 8)

GETTING STARTED

Open the front cover.

Pull down the toner hopper lock lever and pull the toner

hopper out slowly until it stops.

Hold the toner cartridge vertically and vigorously shake

it up and down about 20 times to loosen the toner. This

will allow the toner to flow more easily into the toner

hopper.

Adding toner

GENUINE SUPPLIES

ADDING TONER

The toner required ( ) indicator will light up when toner

concentration level in the developer unit is low. If copying is

continued while the

indicator is lit, copies will gradually become

lighter until the copier stops and the indicator begins blinking.

The

indicator may also begin blinking during long copy runs of

multiple dark originals, even though toner is left. If the indicator

begins to blink, the copier will stop making copies. Open and close

the front cover. After a sufficient amount of toner has been fed,

the

indicator will go out and the START key indicator will light up.

Press the START key to resume copying.

For best copying results, be sure to

use only Sharp Genuine Supplies

which are designed, engineered, and

tested to maximize the life and

performance of Sharp copiers.

Look for the Genuine Supplies label

on the toner package.

Downloaded From ManualsPrinter.com Manuals

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 91 92

No comments

Sharp SF-2530 Specifications Page 8