Sharp FO-DC600 Instruction Manual download pdf (Page 145)

Polling

143

6. Special

Functions

• Enter a full fax number with the numeric keys (max. 60 digits) and then

press . (Note: A maximum of 20 full fax numbers can be entered.

Less can be entered if a large number of programs, timer operations, and/

or group keys have been stored.)

Note: If you need to delete a destination, press or to select the

destination and then press .

Press . Reception will begin.

START/

ENTER

STOP

START/

ENTER

Serial Polling using a Group Key

If the fax machines you want to poll have all been programmed into one Group

Key, you can poll them by simply pressing that Group Key. (The procedure for

programming Group Keys is explained on page 134.)

♦ Make sure no documents are in the feeder before you press the Group Key.

Being polled (Memory polling)

To let another fax machine poll your machine, you must first store the

document(s) in memory using the following procedure. Transmission will take

place when the other fax machine calls your machine and activates polling.

You can choose whether to allow polling only once, or an unlimited number of

times. In the latter case, your machine can be used as an electronic "bulletin

board".

♦ Multiple documents can be stored for memory polling. To add a document

to others already stored, simply repeating the storing procedure (note that if

Department Control is activated, documents cannot be added by a

department other than that which stored the first document). When polling

is initiated, the polling machine will receive all documents stored.

♦ If you allow polling only once, the document(s) will be automatically cleared

from memory after polling. If you allow polling an unlimited number of times,

the document will remain in memory until you clear it as explained in the

following section,

Clearing a document

all.bookPage143Wednesday,December18,20028:17AM

1 ... 144 145 146 ... 220

No comments

Sharp FO-DC600 Instruction Manual Page 145