Sharp PN-655 Instruction Manual download pdf (Page 35)

ENGLISH

■ Dual screen display

You can display the screens of the PC input signal (ANALOG/DIGITAL) and AV input signal

(COMPONENT/VIDEO) simultaneously.

Set this function with “PIP MODES” in the MODE SELECT 3 menu. (See page 32.)

• The currently selected input signal is displayed on the main screen.

•You cannot simultaneously display the screens of signals of the same type, such as two types of PC

input signals or two types of AV input signals. The screens of one of the PC input signals and one of

the AV input signals can be displayed simultaneously.

PIP

Example Example Example

PbyP PbyP2

A sub screen is displayed

inside a main screen.

A main screen of the SXGA size

(1280 x 1024) and a sub screen

are displayed side by side.

A main screen and a sub

screen are displayed side

by side.*

Main screen

Sub

screen

Sub

screen

Sub

screen

Main screen

Main

screen

* If “COMPONENT” is selected for the main screen in PbyP mode and 1080i video

signals are input, the image quality cannot be changed by adjusting the value of

“SHARPNESS” from the VIDEO ADJUSTMENT menu.

■ Enlarge

You can set up 4, 9, or 16 monitors and integrate them into a single large screen to display video. Each

monitor displays an enlargement of 1/4, 1/9, or 1/16 of the original image.

• Using PC digital RGB input/output terminals, up to 4 monitors can be daisy-chained. (See page

18.)

•To connect 9 or 16 monitors to integrate a screen, a separate video signal splitter

(commercially available) is required.

012

345

678

012

345

678

456

8910

14 15

9 screen monitor set-up4 screen monitor set-up

16 screen monitor set-up

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 127 128

Comments to this Manuals

No comments

Sharp PN-655 Instruction Manual Page 35

Comments to this Manuals

Related products and manuals for TVs & monitors Sharp PN-655