Sharp XG-E1200U Instruction Manual download pdf (Page 32)

E-32

Air Filter Maintenance

■ The air filter should be cleaned every 100 hours of use. Clean the

filter more often when the projector is used in a dusty or smoky

location.

■ Have your nearest Authorized Sharp Industrial LCD Products Dealer

or Service Center exchange the filter (PFILD0055CEZZ) when it is no

longer possible to clean it.

Cleaning and Replacing the Filter

4 6

Insert the tab on the end of

the filter cover into the filter

cover opening and press the

filter cover into position.

Place the filter underneath the

tabs on the filter frame.

Return the air filter to its

original position in the filter

cover opening.

Clean the dust off the air filter

and cover with a vacuum

cleaner extension hose.

Clean the AIR FILTER.

Replace the AIR FILTER.

Replace

the FILTER COVER.

1 3

Turn OFF

the MAIN POWER.

Remove

the FILTER COVER.

Remove

the AIR FILTER.

Grasp the air filter between

your fingers and lift it out of

the filter cover.

Press the tab in the

direction of the arrow and

lift open the filter cover.

Press

Tab

Open

OFF

Turn off the MAIN POWER

switch.

POWER indicator goes off.

Unplug the power cord.

Note:

• Be sure the AIR FILTER COVER is securely installed. The power cannot be turned on unless it is correctly

installed.

1. Bottom Air Filter

AIR FILTER cover

2. Side Air Filter

• The side air filter cannot be removed.

• If dust or dirt has collected inside the filter, clean the

filter with a vacuum cleaner extension hose.

AIR FILTER (Not removable)

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38 39

Comments to this Manuals

No comments

Sharp XG-E1200U Instruction Manual Page 32

Comments to this Manuals

Related products and manuals for Projectors Sharp XG-E1200U