Sharp MD-R3 Operations Instructions download pdf (Page 10)

(Continued)

■ Setting the time

After step 7, described in the “Setting the date” section

8 Set the “hour” using the jog dial.

● Turn the jog dial left or right, the hour will increase or de-

crease by one with every click position.

● The clock uses the 12-hour system. Pay attention to the AM

or PM indicator on the display.

AM 0:00 → midnight, PM 0:00 → noon

9 Press the ENTER button to set the “hour”.

10Adjust the “minute” using the jog dial.

11Press the ENTER button to set the “minute”.

● When the ENTER button is pressed, the clock will show the

correct time.

Checking the date and time

After pressing the TIMER button, turn the jog dial until the date

and time are displayed.

Resetting the date and time

See “Setting the clock”.

● Once you have set the date and time, “TIME ADJUST” will

not be displayed in step 2. Turn the jog dial to make the date

and time appear.

● If you do not need to change the settings, just press the

ENTER button without turning the jog dial again.

DELETE/CLEAR

TIMER

ENTER

DATE

CLOCK

DATE

CLOCK

DATE

CLOCK

DATE

CLOCK

MD-R3

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

No comments

Sharp MD-R3 Operations Instructions Page 10