Preparations for any equipment connected to this unit
HOW TO USE THE BUILT-IN TIMER
● Before setting the timer, make sure that the clock setting is correct. (Pages 8 - 9)
● The start time and stop time, which are set with this operation, will be kept in memory until the AC power cord is
unplugged or the setting is changed.
● The stop time setting display will appear.
● The “hours” display will be automatically increased one hour.
■ Timer playback
1 While in the stop mode, press the TIMER button, and then
turn the jog dial until "TIMER SET" appears.
2 Within 10 seconds, press the ENTER button, and then select
"TIMER PLAY" using the jog dial.
3 Press the ENTER button.
● The start time setting display will appear.
4 Enter the “hour”, using the jog dial. Then, press the ENTER
button.
5 Enter the “minute”, using the jog dial. Then, press the ENTER
button.
● The stop time setting display will appear.
6 Enter the “hour”, using the jog dial. Then, press the ENTER
button.
7 Enter the “minute”, using the jog dial. Then, press the ENTER
button.
● The start and stop times are now set.
Before timer playback, the following preparations are required.
● Load a CD or MD.
● Select a CD to be played.
8 Select the source program using the jog dial.
MD → CD
9 Press the ENTER button.
Setting for timer playback:
1 Press the TIMER button, and then select "T-STANDBY" using
the jog dial.
2 Press the ENTER button.
● The settings will appear in order, and the unit will enter the
timer playback stand-by mode. (The power will be turned off.)
Any equipment, such as a stereo, that is connected to this unit
should be set up in advance as follows:
● Adjust the sound level of the equipment.
● If it has a timer function, set it so that the power will be
turned on at the same time as the timer’s start time.
● Adjust the playback volume.
ENTER
DELETE/CLEAR
TIMER
5
4
3
2
1
AM
AM
AM
AM
AM
7
8
6
AM
AM
AM
TIMER
2
1
(Timer standby mode)
Timer playback indicator
MD-R3
36
Comments to this Manuals