Sharp MX-M950 User Manual download pdf (Page 4)

This chapter explains how to clean the machine, dispose of punch and staple waste, and replace the toner collection container.

To ensure a long service life for the machine, perform these maintenance procedures regularly.

CLEANING THE DOCUMENT GLASS AND

AUTOMATIC DOCUMENT FEEDER

DOCUMENT GLASS DOCUMENT BACKPLATE

SHEET

If the document glass or document backplate sheet becomes dirty, the dirt will appear in the scanned image.

To clean the document glass and document backplate sheet, wipe with a clean, soft cloth. If necessary, moisten the cloth with

water or a small amount of neutral detergent. After wiping with the moistened cloth, wipe the parts dry with a clean dry cloth.

SCANNING AREA

Examples of how dirt can affect the image

If black or white lines appear in images scanned using the

automatic document feeder, clean the scanning area.

The area to clean varies depending on whether the dirt

appeared in the image of the front side or the image of

the reverse side of the original. See the procedures

below to clean each area.

REGULAR MAINTENANCE

Warning

Do not use a flammable spray to clean the machine. If gas from the spray comes in contact with hot electrical

components or the fusing unit inside the machine, fire or electrical shock may result.

Do not use thinner, benzene, or similar volatile cleaning agents to clean the machine. These may degrade or discolour the

housing.

Black lines White lines

1 2 3 4 5 6 7 8 9 ... 51 52

No comments

Sharp MX-M950 User Manual Page 4