Sharp AR-FX7 Service Manual download pdf (Page 74)

AR-FX7 KEY OPERATOR PROGRAM 8 - 4

Inside scanned data

The top edge of the scanned image will be cut off by the sender's infor-

mation; however, when both the sender and the receiver use the same

size of paper, the printed fax will neither be reduced nor split up and

printed on two pages.

5. Quick On-line

When the RSPF is used for memory transmission and there are no

previously stored jobs waiting or in progress (and the line is not being

used), the machine dials the destination and begins transmitting

scanned pages while the remaining pages are scanned. This transmis-

sion method is called Quick On-line. The messages "SCANNING

ORIGINAL." and "CONNECTING." both appear until scanning of the

final page is completed.

If the receiving party is busy when a Quick On-line transmission is

attempted, the transmission will be automatically reattempted at a later

time.

NOTE:

• The machine is initially set (factory setting) to perform Quick On-line

transmission. If desired, you can turn off this function in the key

operator programs.

• When an original is transmitted using the following methods, the job

will be stored in memory (Quick On-line transmission will not be per-

formed):

1) Sending from the document glass

2) Broadcast transmission

3) Timer transmission

4) F-code transmission

Direction of transmission

Length of

scanned data

Length of

transmitted data

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 109 110

No comments

Sharp AR-FX7 Service Manual Page 74