Sharp AR-FX7 Service Manual download pdf (Page 17)

AR-FX7 SIMULATION 6 - 1

[6] SIMULATION

1. Code-type simulation

A. Operating procedures and operations

* Entering the simulation mode

1) #/P key (program) ON

→ Asterisk (*) key ON → CLEAR key ON →

Asterisk (*) key ON → Ready for input of a main code of simulation

2) Entering a main code with the 10-key

→ START key ON

3) Entering a sub code with the 10-key

→ START key ON

4) Select an item with the scroll key and the item key.

5) The machine enters the mode corresponding to the selected item.

Press START key to start the simulation operation.

To cancel the current simulation mode or to change the main code

and the sub code, press the CUSTOM SETTINGS key.

* Canceling the simulation mode to return to the normal mode

1) Press CLEAR ALL key.

2. Simulation code list

3. Details

Operation/procedure

Used to display the ROM version of each section.

[Display example]

ROM version 1.250

→ [1.25] (up to 2 decimal places)

The display of the protocol monitor and the soft SW follows this dis-

play.

If it is not installed, "- - - - - - - - - -" is displayed.

[Label code display]

Contents of "XXX" section on the display below

Code

Function

Main Sub

22 5 Used to check the ROM version of each unit

(section).

11 Used to display the FAX send/receive counter

(FAX reception and print counter).

24 10 FAX counter data clear

46 12 FAX exposure level adjustment (1 mode automatic

adjustment)

13 FAX exposure level adjustment (Normal mode

individual adjustment)

14 FAX exposure level adjustment (Fine text mode

individual adjustment)

15 FAX exposure level adjustment (Super Fine mode

individual adjustment)

16 FAX exposure level adjustment (Ultra Fine mode

individual adjustment)

48 8 FAX magnification adjustment (read)

9 FAX magnification adjustment (print)

50 8 FAX lead edge adjustment (read)

9 FAX lead edge adjustment (print)

66 1 Used to change and check the FAX-related soft

SW.

2 Used to clear the FAX-related soft SW. (Except for

the FAX adjustment values)

3 FAX PWB memory check

4 Signal send mode (Signal send level: Max.)

5 Signal send mode (Signal send level soft SW

setting)

6 Printing the confidential password

7 Print the screen memory contents

8 Voice Message send (Signal send level: Max.)

(print) (Japan only)

9 Used to send the voice message. (Signal send

level: Set by soft SW.)

10 Image data memory clear

11 Used to send 300bps signals. (Signal send level:

Max.)

12 Used to send 300bps signals. (Signal send level:

Set by soft SW)

13 Used to register the dial numbers.

14 Used to perform the dial test. (10 PPS send test)

15 Used to perform the dial test. (20 PPS send test)

16 Used to perform the dial test. (DTFM signal send

test)

66 17 Used to check the DTFM signal send operation.

(Signal send level: Max.)

18 Used to check the DTFM signal send operation.

(Signal send level: Set by soft SW.)

19 Used to write the SRAM data to the Flash ROM.

20 Used to write the Flash ROM data to the SRAM.

21 FAX information print

22 Handset sound volume adjustment (Japan only)

24 Used to clear the FAST storage data. (SEC only)

30 Used to set the TEL/LIU.

31 Used to set the TEL/LIU.

32 Receive data check

33 Signal detection check

34 Communication time measurement display

37 Speaker sound volume adjustment

41 CI signal check

22-5

Purpose Adjustment/Setting/Check

Function

(Purpose)

Used to check the ROM version of each unit (section).

Item Software

S/N Machine serial number

MCU Main Control Unit

IMC IMC

OPE Panel + Panel label code

PRINTER

NIC

NIC (For the Soft Nic, the Soft Nic version is displayed.

When the AR-NC5 is installed, the AR-NC5J version is

displayed.)

FINISHER

FAX

Panel

display

Destination Selection code

Panel software support

language

JPN Japan Japanese, American

English, English

EFS SEC AJ/AM American English, English,

French, Spanish

SECL AL/AC

SUK BK/BB

EEU SEEG/

SEA/East

Europe,

etc.

GG/GD English, German, Polish,

Czech, Hungarian, Greek,

Turkish, Russian, French,

Italian, Slovak

Code

Function

Main Sub

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 109 110

Comments to this Manuals

No comments

Sharp AR-FX7 Service Manual Page 17

Comments to this Manuals

Related products and manuals for Copiers Sharp AR-FX7