Sharp DV-RW550U Operations Instructions download pdf (Page 34)

34

Recording

One-touch Timer Recording

Note

• The remaining recording

time will appear on the dis-

play panel during an One-

touch Timer Recording.

Press DISPLAY to see it on

the TV screen.

•You cannot pause a One-

touch Timer Recording.

• Unlike a Timer Recording, you

can perform the following

operations during a One-

touch Timer Recording.

- Turning off the power.

- Using REC/OTR, STOP C.

• The unit will be turned off

automatically under the fol-

lowing conditions.

1)

No space remained on the disc.

2)

When a power failure occurs.

• If OTR is finished in DVD dur-

ing playback or REC mode in

VCR, the DVD will be in stop

mode and the VCR keeps the

current mode.

• When OTR is finished and the

power is turned off, the unit

will switch to the standby

mode automatically if a Timer

Recording has been pro-

grammed. Press T-SET to can-

cel the standby mode for using

the unit continuously.

This is a simple way to set the

recording time in blocks of 30

minutes. Check that the disc has

enough recordable space for the

time you set.

After finishing the recording, the

recorder automatically goes into

standby.

1

Turn on the unit and load a

recordable disc.

Make sure that the TV input is set

on the unit.

2

Select a recording speed

using REC MODE.

Refer to “Recording speed” on

page 26.

3

Make sure that the recording

format is set to the desired

mode.

Refer to “Formatting a disc” on

pages 28-29.

When a DVD-RW disc is

loaded:

You can choose Video mode or

VR mode from the setting menu.

The default is “VR mode”. Refer

to “Choosing the recording for-

mat of a blank disc” on page 28.

When a DVD-R disc is loaded:

DVD-R discs will always be in

Video mode.

4

Select a desired channel to

record using CH K / L or

the Number buttons.

5

Press REC/OTR, then press

REC/OTR repeatedly to

select a desired recording

time.

Recording time appears on the TV

screen (30 minutes to 8 hours).

Recording will start.

When the unit reaches the speci-

fied time, it will be turned off

automatically.

To change the recording time dur-

ing the One-touch Timer

Recording, press REC/OTR

repeatedly

until the desired time

appear.

To cancel the One-touch Timer

Recording within the specified

time, press STOP C.

0:30

(Normal Recording)

8:00 7:30

1:00

I

0:30

press first.

DVD

2

4

5

This operation may take a

while to be recognized.

This operation may take a

while to be completed.

E9656UD_EN_1.qx4 05.7.15 11:55 AM Page 34

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 111 112

Comments to this Manuals

No comments