Sharp PN-E601 User Manual download pdf (Page 8)

MOUNTING PRECAUTIONS

• Sincethemonitorisheavy,consultyourdealerbefore

installing, removing or moving the monitor.

• Wheninstalling,removingormovingthemonitor,ensure

that this is carried out by at least 2 people.

• AmountingbracketcompliantwithVESAspecications

is required. Do not use any screw holes other than VESA

holes for installation.

• Whenmovingthemonitor,besuretoholditwiththe

handles both on the rear and the unit bottom. Do not hold

the LCD panel. This may cause product damage, failure, or

injury.

• Installthemonitorwiththesurfaceperpendiculartoalevel

surface. If necessary, the monitor may be tilted up to 20

degrees upward or downward.

• Mountingthemonitoronthewallrequiresspecialexpertise

and the work must be performed by an authorized SHARP

dealer. You should never attempt to perform any of this

work yourself. Our company will bear no responsibility

for accidents or injuries caused by improper mounting or

mishandling.

• Thismonitorshouldbeusedatanambienttemperature

between 32°F (0°C) and 104°F (40°C). Provide

enough space around the monitor to prevent heat from

accumulating inside.

For the monitor in horizontal orientation

7-7/8 [20]

Unit: inch [cm]

2 [5]

[5]

For the monitor in vertical orientation

Unit: inch [cm]

2 [5]

[5]

7-7/8 [20]

* This monitor can be installed close to a wall. However,

as the monitor emits heat during operation, please be

aware that this heat may discolor or alter the wall.

• Ifitisdifficulttoprovidesufficientspaceforanyreason

such as the installation of the monitor inside a housing, or

if the ambient temperature may be outside of the range

of 32°F (0°C) to 104°F (40°C), install a fan or take other

measures to keep the ambient temperature within the

required range.

• Adheretothefollowingwheninstallingthemonitorinits

vertical orientation. Failing to adhere to the following may

cause malfunctions.

- Install the monitor such that the power LED is located on

the downside.

- Set the MONITOR on the SETUP menu to PORTRAIT.

(See Operation guide.)

• Donotblockanyventilationopenings.Ifthetemperature

inside the monitor rises, this could lead to a malfunction.

• Aftermounting,pleasecarefullyensurethemonitoris

secure, and not able to come loose from the wall or mount.

• Donotplacethemonitoronadevicewhichgeneratesheat.

• Usethesuppliedverticalstickerwhenyouinstallthe

monitor in vertical orientation.

Operation panel

Logo

 Donotremovethefactory-afxedstickerbutafxthelogo

stickeroverit.Becarefulnottocovertheremotecontrol

sensor or buttons.

• Besuretouseawall-mountbracketdesignedor

designated for mounting the monitor.

• Thismonitorisdesignedtobeinstalledonaconcretewall

or pillar. Reinforced work might be necessary for some

materials such as plaster / thin plastic board / wood before

starting installation.

This monitor and bracket must be installed on a wall which

can endure at least 4 times or more the weight of the

monitor. Install by the most suitable method for the material

and the structure.

• Whenattachinganoptionalpart,followthestepsdescribed

in the manual for the optional part.

1 2 3 4 5 6 7 8 9 ... 64

Comments to this Manuals

No comments

Sharp PN-E601 User Manual Page 8

Comments to this Manuals

Related products and manuals for Car Video Sharp PN-E601