Sharp VL-NZ10S User Manual download pdf (Page 75)

Advanced Features

60

Editing

Available mode:

TAPE-VCR

Video editing lets you refine your videos by

removing unwanted sequences from your tape,

or transposing one sequence with another.

This camcorder lets you monitor the source

program on the built-in LCD monitor without

having to connect it to an external TV or video

monitor.

Connect the camcorder to a VCR with the

supplied audio/video/S-video cable, as shown.

Cutting Unwanted Sequences

1 Play back the tape to be edited on the

camcorder, and locate the beginning

and end of the sequence you wish to

cut. Write down the time code reading at

the beginning and end of that sequence

(see page 59). Then, rewind the tape to

before the beginning of the portion that

you wish to keep.

2 Load a video cassette into the recording

VCR.

3 Press m on the camcorder to begin

playback, then press the Record button

on the VCR to begin recording.

4 Press the Pause/Still button on the VCR

to pause recording when the source

tape reaches the beginning of the

sequence to be cut.

5 Press the Pause/Still (or Record) button

on the VCR to resume recording when

the source tape reaches the end of the

sequence to be cut.

POWER

TV/VCR SET UP

CHANNEL

REC

PLAY

STOP/

EJECT

PAUSE

/STILL

:

To stop editing

Press l on the camcorder and press the Stop

button on the VCR.

Notes:

• Some of the transitions between edited

sequences may be slightly off.

• There may be picture noise during video search

or still playback. This does not imply a defect in

the camcorder.

• The time code display will be recorded along

with the edited sequences if the TC OUT item is

set to “ON”. Set to “OFF” before editing (see

page 59).

Notes:

• If your VCR has a 21-pin Euro-SCART connector,

use the RCA/21-pin Euro-SCART conversion

connector (QSOCZ0033TAZZ).

0

VIDEO AUDIO

(L/MONO)

AUDIO

(R)

• See page 2 for how to open the jack cover.

• If your VCR has only one audio input jack, use

the white plug for the audio connection on the

VCR.

• If your VCR has an S-video input socket, you do

not need to connect the yellow video plug.

To AV LS terminal

Recording

Black: To S-video input socket

Yellow: To video input jack

White: To audio input (L) jack

Red: To audio input (R) jack

Audio/video/S-video cable (supplied)

Playback

The arrow shows the signal flow.

21-pin Euro-SCART on VCR

RCA/21-pin Euro-SCART

conversion connector

(QSOCZ0033TAZZ)

Video

Audio R

Audio L

1 ... 74 75 76 ... 111

Comments to this Manuals

No comments