Sharp Plasmacluster FP-N60CX Specifications download pdf (Page 18)

CARE AND MAINTENANCE

WASHABLE ACTIVE CARBON FILTER CARE

Care Cycle

When the Filter Indicator Light

comes on, this indicates that the fil-

ter needs to be cleaned. If the unit

is kept on 24 hours a day then the

Filter Indicator Light will activate in

about 2 months.

The Filter Indicator Light is for ref-

erence. Clean the filter as often as

necessary when odor persists.

• The operating time is recorded

continuously, even if the power

plug is disconnected to move the

unit to another room or for some

other reason.

1

Remove visible dirt with a

vacuum cleaner.

2

Fill a large container with a

mild household detergent and

warm water.

Dilute as indicated on the detergent

container.

CAUTION

• Do not use any cleaner other than

mild (pH neutral) household deter-

gent.

• Make sure that the Washable Active

Carbon Filter does not come into di-

rect contact with undiluted detergent.

3

Allow the filter to

soak approxi-

mately 30 min-

utes before

washing.

If the filter surface is

very dirty, scrub with

an old toothbrush or

the like.

CAUTION

Handle with care to

prevent damage to the

activated carbon par-

ticles.

4

Rinse thoroughly with

clean water

CAUTION

If rinsing in a con-

tainer, be sure to rinse

3 to 4 times so that the

odor is rinsed thor-

oughly from the filter.

If not rinse thoroughly

enough, an odor may

remain.

5

Remove excess water

The filter will be soaked with water after rins-

ing. To decrease drying time, wrap the filter

in an old thick hand towel so that excess

water can be removed. It may take 1 or 2

days to dry.

CAUTION

Some black powder

(activated carbon)

may adhere to the

towel. It is harmless,

but you may want to

use an old towel.

E-16

HAND WASH ONLY!

DO NOT TUMBLE DRY!

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 47 48

Comments to this Manuals

No comments