Sharp Plasmacluster FP-N60CX Specifications download pdf (Page 13)

ENGLISH

E-11

PREPARATION

INSERTING BATTERIES IN THE REMOTE CONTROL

Battery Information

• The batteries for this remote control are for initial use only . Change the

batteries when necessary.

• Incorrect usage of the batteries may cause battery fluid leakage and/or

damage.

Take care of the following when handling:

• When replacing the batteries, replace both batteries with new ones of the

same type. (Use 2 AA manganese batteries.)

• When not using the unit or remote control for an extended period, re-

move the batteries. (This prevents malfunction of the remote control from

battery fluid leakage.)

• The batteries of the accessory are for initial use only and may be de-

pleted within 1 year.

Remove the back cover

Press and slide the back cover to re-

move.

Insert batteries

Insert batteries with and as

shown below.

Close the back cover

REMOTE CONTROL USE

• Operate with the remote control facing the main

unit (Receiver).

• The signal range is about 23 feet (front).

• Make sure there are no objects blocking the path

of the signal.

•A beep sound will be heard from the main unit

when a signal is received.

NOTE

•Avoid dropping or damaging the remote control. In addition, be sure the remote control

avoids moisture or place in direct sunlight or near an electric heater, etc., otherwise a

malfunction may occur.

Receiver

Transmitter

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 47 48

No comments

Sharp Plasmacluster FP-N60CX Specifications Page 13