Sharp FP-N40CX User Manual download pdf (Page 16)

E-14

CARE AND MAINTENANCE

WASHABLE ACTIVE CARBON FILTER CARE

Care Cycle

When the Filter Indicator Light

comes on, this indicates that the fil-

ter needs to be cleaned. If the unit

is kept on 24 hours a day then the

Filter Indicator Light will activate in

about 2 months.

The Filter Indicator Light is for ref-

erence. Clean the filter as often as

necessary when odor persists.

• The operating time is recorded

continuously, even if the power

plug is disconnected to move the

unit to another room or for some

other reason.

1

Remove visible dirt with a

vacuum cleaner.

2

Fill a large container with

warm water, add a mild

household detergent and stir.

Dilute as indicated on the detergent

container.

CAUTION

• Do not use any cleaner other than

mild (pH neutral) household deter-

gent.

• Make sure that the Washable Active

Carbon Filter does not come into di-

rect contact with undiluted detergent.

3

Allow the filter to

soak approxi-

mately 30 min-

utes before

washing.

If the filter surface is

very dirty, scrub with

an old toothbrush or

the like.

CAUTION

Handle with care to

prevent damage to the

activated carbon par-

ticles.

4

Rinse thoroughly with

clean water

CAUTION

If rinsing in a con-

tainer, be sure to rinse

3 to 4 times so that the

odor is rinsed thor-

oughly from the filter.

If not rinse thoroughly

enough, an odor may

remain.

5

Remove excess water

The filter will be soaked with water after rins-

ing. To decrease drying time, wrap the filter

in an old thick hand towel so that excess

water can be removed. It may take 1 or 2

days to dry.

CAUTION

Some black powder

(activated carbon)

may adhere to the

towel. It is harmless,

but you may want to

use an old towel.

HAND WASH ONLY!

DO NOT TUMBLE DRY!

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 43 44

Comments to this Manuals

No comments