Sharp PG-D40W3D Specifications download pdf (Page 26)

-26

The setting procedure for each item will be explained. For the basic procedure, please

refer to “Set Items” on page 24.

Setting up the Projector Using RS-232C or Telnet

IP Address Setting

([1]IP Address)

Setting of IP address.

setup>1

IP Address :192.168.150.2

Please Enter :192.168.150.3

(change)

—> 192.168.150.3

1 Enter “1” and press the “Enter” key.

2 Enter numerical value to be set and press

the “Enter” key.

Display IP address after change (*).

Subnet Mask Setting

([2]Subnet Mask)

Setting subnet mask.

setup>2

Subnet Mask :255.255.255.0

Please Enter :255.0.0.0

(change)

—> 255.0.0.0

1 Enter “2” and press the “Enter” key.

2 Enter numerical value to be set and press

the “Enter” key.

Display subnet mask after change (*).

Default Gateway Setting

([3]Default Gateway)

Setting default gateway.

setup>3

note: “0.0.0.0” means “Using no default gateway.”

Gateway Address :0.0.0.0

Please Enter :192.168.150.1

(change)

—> 192.168.150.1

1 Enter “3” and press the “Enter” key.

2 Enter numerical value to be set and press

the “Enter” key.

Display gateway address after change (*).

If the values for IP Address, Subnet Mask or

Gateway of the projector have been changed

via Telnet, the computer cannot be connected

to the projector depending on the computer's

network settings.

•

Note

User Name Setting

([4]User Name)

Carrying out security protection using user

name.

setup>4

User Name :

Please Enter : XX-XXXX

(change) —> XX-XXXX

1 Enter “4” and press the “Enter” key.

2 Enter user name and press the “Enter” key.

Display set user name (*).

User name can be up to 8 characters.

You can input the characters below:

a-z, A-Z, 0-9, -, _

In the default state, user name is not set.

•

Note

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 34 35

Comments to this Manuals

No comments

Sharp PG-D40W3D Specifications Page 26

Comments to this Manuals

Related products and manuals for Projectors Sharp PG-D40W3D