Sharp AN-WC11B Specifications Page 93

  • Download
  • Add to my manuals
  • Print
  • Page
    / 131
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 92
Easy to Use Functions
-89
4 Press to move the inset pic-
ture.
The inset picture will be moved to the
inset picture frame.
Note
The inset picture can only be displayed
with composite video (NTSC/PAL/
SECAM) or S-Video signal.
The Freeze function works only with the
inset picture, when the Pict in Pict mode
is in operation.
When the signal entered into INPUT 1 is
as follows, Pict in Pict does not work:
With a resolution that exceeds SXGA.
When the input signal is 480
I, 480P,
720P or 1080
I.
When the input signal has changed to
the Interlace mode using RGB signals.
When the picture display mode is set to
DOT BY DOT.
When no signals are sent to INPUT 1,
or when the resolution or refresh rate
(vertical frequency) is changed.
You can use
on the GyroRemote or
on the projector to change the inset
picture.
Activating the sRGB Color Management Function
Setting the Color Manage-
ment Function (sRGB)
Select sRGB in the Options (1) menu
on the menu screen.
For operating the menu screen, see
pages 50 to 55.
Note
For additional information about sRGB
function, please visit http://www.srgb.com/.
Info
When setting sRGB to ON, the pro-
jected image may become dark; however,
this does not indicate a malfunction.
When sRGB is set to ON;
The gamma correction cannot be set.
Red, Blue or CLR Temp in Picture
cannot be adjusted.
This function calibrates the projectors output to conform to sRGB standard (6,500K).
Page view 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 130 131

Comments to this Manuals

No comments