Sharp MX-M350U Setup Guide Page 77

  • Download
  • Add to my manuals
  • Print
  • Page
    / 91
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 76
ADMINISTRATOR SETTINGS
8-3
Procedure for using administrator settings
The procedure for configuring an administrator setting is explained below.
1
Press the [SYSTEM SETTINGS] key.
2
Touch the [ADMINISTRATOR SETTINGS]
key.
3
Use the numeric keys to enter the five-digit
administrator password.
The factory default
setting for the
administrator password
is indicated on page 2 of
the administrator settings
guide.
4
Touch the [PRINTER SETTINGS] key.
Follow these steps to
select the setting that
you wish to use.
In the following steps,
the setting screens for
the selected setting will
appear. Refer to the
setting explanations on page 8-5
and following,
and then follow these steps to select a setting for
the setting.
5
Make desired settings for the selected
setting.
Select the desired setting from the settings shown
on page 8-2
.
Detailed descriptions for settings start on the next
page.
6
When you have finished configuring
settings, touch the [OK] key and then the
[Exit] key.
Exit the administrator
settings.
Supplementary explanation of key operation for administrator settings
A Check mark boxes are touch keys that show the status of selections. A box with a check mark means the function
is "on" (enabled) and an unchecked box means the function is "off" (disabled). Alternate touches of a box will
change the on/off status.
B The name of the setting category or particular item to be set will appear on the touch key. A touch of the key will
select the item displayed.
C If the settings continue on the following screen (s), touch the and keys to move back and forth through
the screens. To return to the category selection screen, touch the [OK] key.
D The currently set numerical value is displayed.
E Numerical values can be set by touching the and keys.
B STATUS
SYSTEM
SETTINGS
ADMINISTRATOR SETTINGS
DEFAULT
SETTINGS
FAX DATA
RECEIVE/FORWARD
LIST PRINT
SENDER CONTOROL
ADMINISTRATOR PASSWORD
EXIT
SAVE
OPERATION
SETTINGS
K
GS
PRINTER
SETTINGS
1/2
D E
A
B
SYSTEM SETTINGS
INTERFACE SETTINGS
HEXADECIMAL DUMP MODE
ENABLE USB PORT
ENABLE NETWORK PORT
20
1/2
AUTO
AUTO
I/O TIMEOUT
USB PORT EMULATION
SWITCHING
NETWORK PORT EMULATION
SWITCHING
OK
20
(1 999)
C
These keys and indicator are
available on setting screens that
require the entry of numerical
values.
Page view 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 90 91

Comments to this Manuals

No comments