Sharp M450U Setup Guide Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 93
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
SCANNING SETTINGS (ORIGINAL SIZE, EXPOSURE, RESOLUTION AND FILE FORMAT)
2-18
SELECTING THE EXPOSURE
You can adjust the exposure manually to match the type of original. After loading the original in image send mode,
follow the steps below. The default setting for the exposure is "AUTO".
Change the exposure
1
Touch the [EXPOSURE] key.
2
Select [AUTO] or [MANUAL].
If you selected [AUTO],
the exposure will be
adjusted automatically.
If you selected
[MANUAL], touch the
or key to adjust
the exposure. (For
darker contrast, touch
the key. For lighter
contrast, touch the
key.)
3
Touch the [OK] key.
You will return to the
initial screen.
SELECTING THE RESOLUTION
The resolution for scanning an original can be selected. Load the original in image send mode and then follow the
steps below. The default setting for the resolution is "300x300dpi" (SCAN mode) or "STANDARD" (INTERNET-FAX
mode).
Change the resolution
1
Touch the [RESOLUTION] key.
2
Touch the desired resolution key.
SCAN mode
Four selections are available for the resolution.
Touch the desired resolution key depending on the
original to be scanned.
The selected key is highlighted.
300
x
300dpi
RESOLUTION
PDF MMR(G4)
FILE FORMAT
AUTO
EXPOSURE
AUTO A4
AUTO
MANUAL
O
1 3 5
AUTO
MANUAL
O
1 3 5
NOTE
The default value of exposure can be set using the
administrator setting, "Default exposure settings"
(page 8-5
).
AUTO
MANUAL
OK
1 3 5
300
x
300dpi
RESOLUTION
PDF MMR(G4)
FILE FORMAT
AUTO
EXPOSURE
AUTO A4
AUTO
ORIGINAL
RESOLUTION
AUTO
READY TO SEND.
EXPOSURE
PROGRAMMED
FILE FORMAT
200
x
200dpi
300
x
300dpi
400
x
400dpi
600
x
600dpi
HALF TONE
OK
Page view 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 92 93

Comments to this Manuals

No comments