Sharp AJ-6010 Setup Guide download pdf (Page 77)

Maintenance

Aligning the Print Head (part 1)

Align the print head after installing or changing the print head, or if printed lines are not straight, or have blank

spaces. Follow the steps below to align the print head.

Make sure that A4 sized paper is set in the tray.

Click the "Advanced" tab in the properties dialog

box, and then click "Maintenance" button.

Click the "Start" button of "Print alignment

patterns".

Click the "OK" button.

The "Align print head" dialog box will appear, and a test

chart will be printed.

Check the test chart results, and change the

preferences to the best setting for each pattern.

Select a pattern sample for "Pattern A".

Seventeen block figures with a vertical line on each

vertical side ( ) are printed in pattern A. Of the

seventeen figures determine which block is most nearly

centred between the vertical lines and select the

corresponding number.

-8 -7 -6 -5 -4 -3 -2 -1 0 +1 +2 +3 +4 +5 +6 +7 +8

-8

Example:

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 92 93

No comments

Sharp AJ-6010 Setup Guide Page 77