Sharp AJ-6010 Setup Guide download pdf (Page 69)

Maintenance

Changing the Ink Tank (part 1)

Ensure the unit is turned on before following the steps below on how to change the ink tank.

Turn the front cover locking knob with one hand

and lift the front cover with the other hand, while

keeping the knob in the unlocked position.

The carriage will automatically move to the centre position.

Reference:

See "INSTALLING THE PRINT HEADS AND

THE INK TANKS" in the Setup Guide and

Operation Manual for more detail on how to

open the front cover.

Open the maintenance cover.

Remove the old ink tank.

While pressing the tab forward, remove the ink tank.

During ink tank replacement, if the front cover is left open for more than 8 minutes, the carriage will automatically return to its

home position.

Do not put your hands into the unit until the carriage

stops at the centre position. Doing so may hurt your

hands. Do not try to move the carriage manually by

force, you may damage the unit.

Do not lift the print head latch to replace the ink tank.

Press the tab forward.

Example: Releasing the yellow ink

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 92 93

No comments

Sharp AJ-6010 Setup Guide Page 69