Sharp AJ-6010 Setup Guide download pdf (Page 74)

Maintenance

Changing the Print Head (part 1)

If print quality is poor, after cleaning the print head 5 times, the print head may be worn.

Ensure the unit is turned on before following the steps below on how to change the print head.

Turn the front cover locking knob with one hand

and lift the front cover with the other hand, while

keeping the knob in the unlocked position.

The carriage will automatically move to the centre position.

Reference:

See "INSTALLING THE PRINT HEADS AND

THE INK TANKS" in the Setup Guide and

Operation Manual for more detail on how to

open the front cover.

Open the maintenance cover.

Raise the print head latch.

Raise the latch until it comes to a complete halt.

Do not put your hands into the unit until the carriage

stops at the centre position. Doing so may hurt your

hands. Do not try to move the carriage manually by

force, you may damage the unit.

Raise this lever.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 92 93

No comments

Sharp AJ-6010 Setup Guide Page 74