Sharp R-210D Service Manual download pdf (Page 49)

___________________________________________________________________________ Section 4

4-3

Flip unit over so that it is resting on the writer. Locate the mounting screws for the top cover. These are the screws

around the perimeter of the unit and marked with arrows in the plastic.

Loosen these screws, item number 14 in parts list, using a Philips head screwdriver.

Note: When removing screws, loosen the screw and do not remove, the screw can remain in the screw hole

by placing tape over the holes with the screw still in the hole. The tape will hold the screw so that it

will not be lost during disassembly.

Flip the unit upright so that it is in its normal position.

CAUTION

The unit will be in three pieces, the Top, the Bottom and the Connector Bulkhead. Care

must be taken when flipping the unit over. Hold the top cover to the bottom of the unit

securely when flipping unit over.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 110 111

No comments

Sharp R-210D Service Manual Page 49