Sharp AR-M208 Operations Instructions Page 74

  • Download
  • Add to my manuals
  • Print
  • Page
    / 128
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 73
72
COPIER TROUBLE?
STATUS MESSAGES
If any of the following messages appears in the display, carry out the prescribed remedy.
Message Remedy
(Maintenance icon)
Maintenance required
soon.
Service by an authorized SHARP service technician will be
required soon. Contact your service center as soon as possible.
(This message will be displayed if the information key is
pressed when the information ( ) icon is displayed.)
Maintenance required.
Call for service.
Normal maintenance service by an authorized SHARP service
technician is needed. Contact your service center.
Call for service. A malfunction has occurred which cannot be corrected by the
key operator. Contact your authorized SHARP service center
for service.
(Toner cartridge
replacement required icon)
Toner is low.
Replacement of the toner cartridge will be needed soon. (This
message will be displayed if the information key is pressed
when the information ( ) icon is displayed.) See page 90.
Check the toner cartridge. Check to see if the toner cartridge has been installed properly.
Can not continue.
Remove paper from the
center tray.
The number of copies on the center tray has reached the limit.
Remove the copies from the center tray.
Please check paper in paper
tray<>.
Check to see if copy paper has been loaded properly.
Load <✼✼> paper into
tray <>. Or cancel job and
change the paper size setting.
The paper size specified for the tray is different from the actual
size. See page 86.
Selected paper tray is out of
service.
Contact your authorized SHARP service center for service.
Check stapler or staple jam. Staples become jammed or the staple box is not installed
properly (when an optional finisher is installed). Check the
staple box. See page 108 for staple jam removal. Contact your
authorized SHARP service center for service.
Please remove paper
from the stapler compiler.
Paper is left in the stapler compiler. Remove it. See page 110.
<>: paper tray number
<✼✼>: paper size to be set
Ar-M208_sec.book 72 ページ 2002年6月13日 木曜日 午後2時37分
Page view 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 127 128

Comments to this Manuals

No comments