Sharp AR-5120 Specifications download pdf (Page 16)

MAKING COPIES

NORMAL COPYING

Turn the power switch on.

●

It will take about 35 seconds for the copier to warm up. However, you

can make desired settings and press the START ( ) key during

warm-up. Copying will start after warm-up.

●

If the copier has been programmed in the auditing mode, the START

key ( ) indicator will not light up and “–––” will appear in the copy

quantity display. Enter an assigned 3-digit account number. See page

13.

Place the original face down on the original table. Align

it with the original size scale.

●

Image loss (max. 4 mm) can occur at the leading and trailing edges of

the copies. Also image loss (max. 4 mm in total) can occur along the

other edges of the copies.

Close the platen cover.

Ensure that the copy paper size in the paper tray is the

same size as the original.

●

AR-5120 only Use the ORIGINAL SIZE ENTER ( ) key to

select the original size. Copy paper of the same size as the original will

be automatically selected. If desired, another paper tray can be

selected by pressing the TRAY SELECT ( ) key.

●

If paper of the required size is not loaded in the paper tray, use the

bypass tray and press the TRAY SELECT ( ) key to select the

bypass tray.

Adjust the copy density.

●

This copier has three exposure modes to choose from — AUTOMATIC

( ), MANUAL ( ), and PHOTO ( ).

●

Automatic exposure is the standard initial setting for this copier. In this

mode, the characteristics of the original are “read” by the exposure

system and adjustments are automatically made. This optimizes the

contrast of the copied images by reducing the effect of coloured or

shaded background areas. See page 26 to adjust the automatic exposure

level.

Normal copying

Power on

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 65 66

Comments to this Manuals

No comments

Sharp AR-5120 Specifications Page 16

Comments to this Manuals

Related products and manuals for Copiers Sharp AR-5120