Sharp VL-Z1H Specifications download pdf (Page 31)

Basic Operations

19

Easy Camera

Recording in Full

Auto Mode

• Before you start recording, perform the

operations described on pages 5 through

18 to prepare your camcorder for

recording.

1 Remove the lens cap.

2 Hold down the Lock button and set

the Power switch to v.

• The picture from the lens now

displays and the POWER/CHARGE

(RED) indicator lights up green.

• The camcorder is now ready to

record (Recording Standby mode).

Note:

• If “AUTO” is not displayed at this time,

set the camcorder to Full Auto mode

(see page 52).

AU T OAUTO

3 Press the Start/Stop button to begin

recording.

REC

Note:

• Before recording an important scene,

please perform the recording test, then

playback to check if the scene was

recorded properly. If noise occurs, use a

commercially available cleaning tape to

clean the video heads (see page xii).

Maximum continuous recording and

actual recording times

Note:

• Using the zoom (see page 20) and other

functions or turning the power on and off

frequently will increase power consump-

tion. This may result in a decrease in the

actual recording time compared to the

maximum continuous recording time listed

above.

Basic Operations

Camera Recording

BT-L226

Battery

pack

Max. continuous

recording time

120

LCD

closed

LCD

open

105

Actual

recording time

60

LCD

closed

LCD

open

55

Start/Stop button

Power switch

Lock button

POWER/CHARGE

(RED) indicator

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 87 88

Comments to this Manuals

No comments