Sharp UP-600 User Manual download pdf (Page 114)

114

Direct Key Programming

Use the following procedure to select direct-key programming:

Direct PLU/COMBO/Dept. key

You can assign PLUs, combo meals and departments directly to the keyboard. In the case of combo meals

or PLUs, you may assign up to 10-levels to be accessed directly on the keyboard.

In the case of setting “00001 DIRECT PLU”

Select the desired key no. from the

key numbers list (Refer to the next

page).

In the SETTING window, select “02 DIRECT KEY.”

• The DIRECT KEY window will appear.

• TYPE (Use the selective entry)

PLU: Assigns the key as a direct PLU key.

COMBO: Assigns the key as a direct combo key.

DEPT: Assigns the key as a direct department key.

NOTE

•

You can also select a direct PLU key by pressing the

corresponding key when the PLU has been assigned directly

on the keyboard instead of selecting the key from the menu.

•

When selecting a department, the screen on which a

department code is to be entered (the message “DEPT.

CODE”) will appear.

•

When selecting a combo, the screen on which a combo table

number is to be entered (“COMBO TBL#”) will appear.

• LEVEL1 thru 5 (Use the numeric entry)

Enter a PLU number or combo table number for each level.

For example, if you want to use this key as PLU code 1 (level

1) and PLU code 101 (level 2), enter 1 for the “LEVEL1” and

101 for the “LEVEL2.”

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 225 226

No comments

Sharp UP-600 User Manual Page 114