Sharp CD-G22000 Specifications

Browse online or download Specifications for Telescopes Sharp CD-G22000. Sharp CD-G22000 Specifications User Manual

  • Download
  • Add to my manuals
  • Print

Summary of Contents

Page 1 - Operating

G2 CCDOperating Manual

Page 2

These cameras are able to acquire color image in single exposure, without the necessity to change color filters. On the other side color mask brings l

Page 3 - Table of Contents

Model G2-0402G2-0402 model uses 0.4 MPx Kodak KAF-0402ME Class 1 or 2 CCD chip.Resolution768×512 pixelsPixel size9×9 µmImaging area6.9×4.6 mmFull well

Page 4

Output node capacity Approx. 220 000 e-Dark current 1 e-/s/pixel at 0°CDark signal doubling 6.3 °CModel G2-3200G2-3200 model uses 3.2 MPx Kodak KAF-32

Page 5 - Introduction

Full well capacity Approx. 40 000 e-Output node capacity Approx. 100 000 e-Dark current 0.3 e-/s/pixel at 0°CDark signal doubling 7 °CKAI-4022 CCD det

Page 6

Model G2-0402Gain1.5e-/ADU (1×l binning)2.3e-/ADU (other binnings)System read noise 12 e- (LN read)15 e- (Standard read)Full frame download 0.6 s (LN

Page 7

Model G2-4000Gain 1.0 e-/ADU (all binnings)System read noise 7 e- (LN read)10 e- (Standard read)Full frame download 6.8 s (LN read)5.7 s (Standard rea

Page 8

TEC modules Two stagesMaximal ∆T>50 °C below ambientRegulated ∆T48 °C below ambient (85% cooling)Regulation precision±0.1 °CHot side cooling Forced

Page 9

control software. Input voltage is displayed in the Cooling tab of the CCD Camera control tool in the SIMS. This feature is important especially if yo

Page 10 - CCD Chip

Package ContentsG2 CCD cameras are supplied in the foam-filled, hard carrying case containing:● Camera body with a user-chosen telescope adapter. The

Page 11 - Model G2-1600

● A CD-ROM with camera drivers, SIMS software package with electronic documentation and PDF version of this manual.● A printed copy of this manual.Opt

Page 12 - Model G2-4000

Version 2.3Modified on November 26th, 2009All information furnished by Moravian Instruments is believed to be accurate. Moravian Instruments reserves

Page 13 - Camera Electronics

Another filter wheel can be also ordered separately. Replacing the whole filter wheel is easier than replacing individual filters. It is possible to t

Page 14

contains high-pass Red, Green and Blue filters plus Luminance filter covering the combined RGB spectral range, blocking IR and UV portion of spectrum

Page 15 - CCD Chip Cooling

Telescope adapterThe camera is supplied with standard 2" barrel adapter by default, but the user can choose any other adapter he/she prefers. Ano

Page 16 - Power Supply

Canon EOS lens adapterStandard Canon bayonet adapterNikon F lens adapterStandard Nikon F bayonet adapterPSB-1100 adapter Threaded adapter for TeleVue

Page 17 - Mechanical Specifications

Getting StartedAlthough the camera is intended for operation at night (or for very low-light conditions at day), it is always better (and highly recom

Page 18 - Package Contents

site. Reject this offer (choose “No, not this time”) and click “Next” button.2. Choose the “Install the software automatically” in the next step.Inser

Page 19 - Optional components

USB port (different USB connector on the PC or through the USB hub), Windows reports “found new hardware” again and asks you to install the software.

Page 20 - LRGB filter set

g1ccd = g1ccd.dllg2ccd2 = g2ccd2.dllg3ccd = g3ccd.dll[GPS]GarminUSB = gps18.dllNMEA = nmeagps.dll[Telescope]NexStar = nexstar.dllLX200 = lx200.dllIndi

Page 21 - Separate filters

to provide information about available filters (if the particular camera has the integrated filter wheel, of course). But the user can order camera wi

Page 22 - Telescope adapter

Camera ConnectionCamera connection is pretty easy. Plug the power supply into the camera and connect the camera to the computer USB port using the sup

Page 23

Table of ContentsIntroduction...5Camera Technical Spe

Page 24 - Getting Started

starts to rotate and the camera control unit searches for the filter wheel home position. This operation takes a few seconds, during which the camera

Page 25

directly to USB ports available on the computer I/O panel or through the USB hub. The operating system assigns unique name to every connected USB devi

Page 26 - SIMS Software Installation

Camera OperationCamera operation depends on the software used. Scientific cameras usually cannot be operated independently on the host computer and G2

Page 27 - G2 CCD Camera Driver for SIMS

Camera and the TelescopeThe camera needs some optical system to capture real images. It depends on the telescope adapter to which telescopes (or lense

Page 28

(SIMS User's Guide explains why cooling is important to reduce thermal noise). If you plug the G2 CCD to power supply, you may notice the fans on

Page 29 - Camera Connection

target temperature is displayed in cyan color on the graph. The current chip temperature is displayed in red. Also notice the blue line, which display

Page 30 - Working with Multiple Cameras

First ImagesActual exposure is performed from the “Exposure” tab of the CCD Camera tool.Illustration 15: Exposure tab of the CCD Camera Control toolIt

Page 31

options for every exposure type separately. So it is possible e.g. to define separate folders for dark frames and for flat fields.Always check whether

Page 32 - Camera Operation

better with the related horizontal sliders. Observe how the image view is changed when you alter these values.The best positions of Low and High contr

Page 33 - Temperature Control

Illustration 17: The raw image downloaded from the cameraThe Dark frame is taken with the same exposition time at the same CCD chip temperature. Becau

Page 34

First Images...36Brightness and Contrast – Image Stretching..

Page 35 - °C per minute

Illustration 20: Flat field represents the telescope/camera response to uniformly illuminated field Illustration 21: Fully calibrated image with dark

Page 36 - First Images

● Color CCD chips have one fixed set of filters without the possibility to exchange them or to completely remove them. Monochrome chip is capable to t

Page 37

Illustration 22: “(L)RGB Image Add“ tool in SIMS...Illustration 23: ...and a resulting image42

Page 38 - Calibration

If we take images for individual colors and also luminance image, possibly with different binning and exposure times, the calibration starts to be rel

Page 39

There are several algorithms for calculating missing color components of individual pixels – from simply using of color from neighboring pixels (this

Page 40

the original raw image.Also please note the settings of the “Bayer X odd” and “Bayer Y odd” check boxes must be altered when any geometric transformat

Page 41

46Illustration 25: Histogram and Stretch tool shows histograms of individual colors

Page 42

Some General Rules for Successful ImagingAdvanced CCD cameras caused a revolution in amateur astronomy. Amateurs started to capture images of deep-sky

Page 43

● Focus image properly. Almost unnoticeable focuser shift affects star diameter. Focusing, especially on fast telescopes, is critical for sharp images

Page 44

successful night out. Nights can become cloudy or foggy, the full Moon can shine too much, the seeing can be extremely bad… Number of things can come

Page 45 - Balancing colors

IntroductionThank you for choosing the G2 CCD camera. The cooled, slow-scan series of G2 CCD cameras were developed for imaging under extremely low-li

Page 46

Camera MaintenanceThe G2 CCD camera is a precision optical and mechanical instrument, so it should be handled with care. Camera should be protected fr

Page 47 - Successful Imaging

amount of water absorbed – it is bright orange when it is dry and turns to transparent without any color hue when it becomes wet. The temperature rang

Page 48

The desiccant chamber used in G2 cameras revision 3 and higher can be filled with a hot silica-gel without a danger of damaging of the container.Chang

Page 50 - Camera Maintenance

Warning:Do not fill the plastic chamber in the G2 cameras revision 1 and 2 with hot silica gel. Let it cool down first, preferably in some hermetical

Page 51

Camera cannot be opened in such case.Opening the camera head of G2 cameras revision 1 and 2The blade shutter rotates 180° between individual snapshots

Page 52

Every filter position in the wheel is defined by the index hole. The hole defining the first position is preceded by another hole.Older versions of G2

Page 53

57Illustration 29: Filter positions on filter wheels with 5 and 6 positions and 98 mm diameterIllustration 30: Filter positions on filter wheels with

Page 54 - Changing Filters

Changing the Whole Filter WheelThe whole filter wheel can be changed at once. It is necessary to remove the front part of the camera case the same way

Page 55

to the host PC. Although G2 CCD cameras can operate through a USB hub, it can negatively affect the camera performance, like download time etc. It is

Page 56

Camera Technical SpecificationsG2 series of CCD cameras are manufactured with two kinds of CCD detectors:● G2 cameras with Kodak KAF (Full Frame – FF)

Page 57

● G2 cameras with Kodak KAI (Interline Transfer – IT) architecture. There is a shielded column of pixels just beside each column of active pixels on t

Page 58 - Power Supply Fuse

G2 camera models with Full Frame CCD detectors:Model G2-0402 G2-1600 G2-3200CCD chip KAF-0402ME KAF-1603ME KAF-3200MEResolution768×512 1536×1024 2184×

Comments to this Manuals

No comments